Knipex 15 61 160 - Reviews
(4.1)
59 reviews
Info
Reviewbucket.co.uk scanned the internet for Knipex 15 61 160 reviews.
You can find all Knipex 15 61 160 reviews and ratings on this page.
Analysis
For Knipex 15 61 160, 59 customer reviews collected from 1 e-commerce sites, and the average score is 4.1.
Detailed seller stats;
Amazon has 59 customer reviews and the average score is 4.1. Go to this seller.
Detail
Similar Items
9.12.2014
Very happy with these strippers as they have made a repetitive job much easier. I have to strip 100's of small lengths of 6mm single core cable at both ends. Not quite sure why the built in cutter is only for 2.5mm cable though because it means I have to cut my small lengths of cable with another set of cutters, thus it would of been good to have these cut my 6mm cable. The adjustable guide to set the stripping length is a bit fiddly, also if it is set to approx 13mm or more then you will have to physically pull of the waste insulation from the conductor after the stripping action, as it will not be ejected automatically. After a while the jaws stopped springing open after a cut,
11.3.2020
Initial impressions of this tool are not good. It's very lightweight and feels cheap and flimsy in the hand. However, once you start using it, any misgivings are quickly put away.The wire stripper works very well. i tried it on a variety of wires and cables of different sizes from tiny multi strand wire to 2.5mm single strand wire, and it worked perfectly every time. I saw no evidence of damaged copper, the insulation came away easily and cleanly.The tool is not cheap, but will save you much time and effort. It also means your work will be more professional and - because you will not have knicked and damaged the copper - your work will be easier to assemble and more reliable in use.I suggest
5.1.2020
I bought this pair of wire strippers because I was fed up of struggling with the myriad of alternative and cheap tools designed to do the job but which do it badly. It's KNIPEX so it's not going to be cheap but I sincerely wish I had bought these years ago, the precision they offer is much better than the cruder alternative designs. I am not an electrician but had a lot of little electrical jobs to do as a result of moving house and these made every job a lot easier. How you can reliably strip the outer sheath of appliance flex without attacking the inner insulation, and then gently and precisely strip the inner insulation from the conductor without just tearing it to pieces or pulling the
11.4.2021
So far so good, I have upgraded to these from a set of side entry "pull apart" type cable strippers. The same style I had ran for the last 20+ years.But I won't be going back to them, as these are mind blowing from a speed perspective in comparison. Also the accuracy you gain from the adjustable depth stop is amazing.It helps when using things like ferrules or molex plug terminals for making sure that they all line up nicely when inserted. No more tearing or stretching of the cable sheath.I really like them, and they are a dream to use on anything from 24 guage cable down to 2.5mm house wiring cable.
1.2.2017
Well, quality as expected. Good. But mind that:- Only allows for the length of up to 18mm. E.g. if you wanted to get 2cm of clean wire or get get a cut between wired sections, it wouldn't be possible, unlike in front faced strippers.- Length adjustment is very flimsy and not precise.- Would strip up to 6mm of insulation, therefore can't strip standard 240v cable sheath, only wire insulation.All in all good for a certain profi task. Not fit for the DIY toolbox as a generic tool.
10.7.2020
I've been after some decent wire strippers for a while and came across these. They do a good job of stripping the insulation off without damaging the core.Pro1. The bite can be adjusted if you are damaging the core allowing you to easy it back.2. Easy to operate3.Light weight4.Can strip 0.2mm wire and upwards.Cons1. Feel cheap plastic apart from the teeth which are metal.
23.2.2020
I haven't tried this with house wiring cable which might be asking a lot of it, but for wiring model railways it is ideal. You only need the tip of the wire available to be able to cut away the insulation.Expensive but you get what you pay for.
12.1.2017
They're a bit of a grey area of sizes, as they refuse to strip anything around or under standard IDC jumper cable diameter, with a relatively low higher threshold. Having said that if the diameter suits your needs then these are very satisfying.
16.4.2021
For those who have arthritic hands this is far superior than the more traditional wire strippers that rely on the users' hand muscles to ensure accurate cutting and stripping. Lightweight but sturdy.
4.7.2019
Have had a few cheepo strippers over the years. This one is a lot nicer. Quite pricey but worth it. We should all try to cut down on buying cheep semi disposable tools.
2.4.2020
Best tool Iv brought in a long while, had a lot of single stranded wiring to do and this came in great super fast,quick clean cut, and make doing a DB very tidy
2.7.2019
Well made product and easy to use. Managed up to 4mm csa cable easily. No setting up and no ripping of insulation. Much better than the cheaper alternatives
24.6.2018
yea these are good for getting the same strip on all your wires have only used them on 18AWG gauge cables and have only positive praise for this item
16.4.2016
Knipex quality product as always expected from this brand. Works well with great results. Good value and delivery well within advertised time scales
10.3.2021
I do a lot of instrumentation and control work and these have proved great for stripping to put bootlace ferrules on fine stranded cables.