logo

Info


Reviewbucket.co.uk scanned the internet for GELID Silent 6 (FN-SX06-38) reviews.
You can find all GELID Silent 6 (FN-SX06-38) reviews and ratings on this page.

Read the reviews.

Analysis


For GELID Silent 6 (FN-SX06-38), 23 customer reviews collected from 2 e-commerce sites, and the average score is 4.2.

Detailed seller stats;
Amazon has 20 customer reviews and the average score is 4. Go to this seller.
Ebay has 3 customer reviews and the average score is 5. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

19.2.2015

I replaced the cooler master 50mm fan that came with my AMD AM1 Athlon 5350 with this. In the tiny mITX case I have, I was able to velcro this 60mm fan to the HDD mount and against the heatsink, directed downwards and cooling the CPU. This is the only fan in the case with both a 2.5" HDD and a SSD.The old fan needed a resistor cable to keep noise under control, with BIOS speed minimum of 12.5%.Under cpu/gpu load the old fan spun up 100% and made loads of noise.This Gelid fan wouldn't actually spin up with the resistor cable and the BIOS settings above - I just didn't need the resistor cable. I could set the BIOS minimum speed to 37.5% with the fan inaudible from about 2m away (50% was audible).During an hour long FurMark CPU/GPU burn in while the HDD defragged, the fan had yet to increase speed at all and the temperatures were a steady 69C for the CPU, 47C for the case in a cool-ish room - remember this is the only fan in a tiny case with a HDD and a SSD.Really happy with this fan. It would have been perfect in black, as it can be seen through the case grill.
Read more..

11.9.2014

I bought this to replace a dead fan in a G-Technology G-Safe (2 HDD RAID).I chose the Gelid as it was:1. Offered by Quiet PC.com, so I thought it would be quiet! (they were out of stock, so I bought from Amazon.)2. Almost, but not quite, the same dimensions as the original fan (Sunon KDE1206FV2, 60x60x10)http://www.gelidsolutions.com/products/index.php?lid=2&cid=5&id=75&tab=2The connector on the Gelid was different to that on the Sunon & the G-Safe circuit board, so I contacted Gelid for a wiring diagram (the wires are all black) they replied promptly. (I've uploaded the annotated photo that Gelid sent me. Look for 'product images from customers' on this page.)I cut the wires & connector off the Sunon,and connected them to the wires on the Gelid. My wiring was a bit of an ugly bodge, but its all hidden away inside the gizmo.It works. You can hear the fan, but its not loud.
Read more..

16.6.2020

I used this to replace the fan in a meanwell power supply (LRS-350-24) that was fitted to an Ender 3 Pro, the fan is massively quiet compared to the stock fan and changing was a breeze as the meanwell fan is also 12v, the only negative is this fan does not seem to have as much airflow and the fan is on nearly constantly, but this isn't really an issue as you will hear it anyway and the fact that the fan does turn off every now and then tells me its still doing the job of keeping it cool.You will need to change the connector on the end, what i did was snip the connector from the old fan and solder to the ends of this new oneThe wiring you can get from a google search of the new fans name andthat will take you to the manufactures website
Read more..

28.10.2019

Marketing this as a 'silent' fan is just complete nonsense. It's actually quite a loud fan. I'm happy with it in terms of airflow provided for the depth of the fan, but it's really far noisier than I'd hoped for.

14.11.2019

There is nothing on the fan to show either rotation (not that that is important) or air flow (which is more important). Was easy to fit into case, but I needed to buy an adaptor for the three pin molex plugs.

21.4.2020

Used this fan as a replacement for my power supply unit noisy one - excellent and ive had no issues at all - much improved noise levels without loss of performance

11.1.2020

Handy little fan for my 3D printer and works like a charm. Easy to install and minimal packaging so it’s winner for me :) will buy again if needed.

8.8.2018

Replaced a similar sized fan which was making loud noises with this - high throughput keeps the UPS cool in this heatwave and not too loud either.

31.12.2016

Good replacement fan although a little noisier than the original. Fast delivery and very happy with it.

14.4.2019

Does what it's meant to, nice quality and very quiet, not much else I can say about it.

23.2.2020

If I didn't see them spinning, I wouldn't know they were running.

16.5.2018

Very quite. Good replacement for my 3D printer fan

6.12.2017

They are realy quite and keep my powersuply cool

23.2.2020

Does what I wanted works well!

17.7.2019

Good produkt

List All Products

Terms and ConditionsPrivacy Policy