Dyson 965876-01 - Reviews
(4.5)
242 reviews
Info
Reviewbucket.co.uk scanned the internet for Dyson 965876-01 reviews.
You can find all Dyson 965876-01 reviews and ratings on this page.
Analysis
For Dyson 965876-01, 242 customer reviews collected from 2 e-commerce sites, and the average score is 4.5.
Detailed seller stats;
Amazon has 192 customer reviews and the average score is 4.5. Go to this seller.
Ebay has 50 customer reviews and the average score is 4.6. Go to this seller.
Detail
Similar Items
5.3.2018
For me this is a must have if you own a Dyson handheld or cordless vac. I personally have the V6 pro (DC58) and it fits perfectly. Only took me 5 mins to fit and it makes storing/charging the Dyson so much easier. It sounds lazy but it just makes everything about it more convenient. It just slots in and charges using the charger that came with the vacThere seems to be a little confusion about which way up to mount the holder. The photo on the listing is correct, I have also added some photos of it after Installation.It doesn’t come with any screws or anything to mount it with, you need to provide these yourself depending on the the type of wall you are fixing it to.The material it’s constructed out of exactly matches my vac so it looks great and as good as an original Dyson part.
11.1.2018
This is exactly the same holder as comes with the more expensive Dyson handhelds and its absolutely great quality. The picture orientation is actually correct despite those reviews that say otherwise. The two tool holders point downwards. The vac slots in at the top and should also point downwards. It cannot fall out of the holder and for my other handheld that came with a 3' extension that would point downwards towards the floor, not upwards towards the ceiling. Note that the power supply slots neatly in to the base of the vac holder (at the top) and you route the cable down the back of the holder in the special grooved cable slot (against the wall) and out of the way of the tools and vac.
3.6.2016
Wow - this is an excellent addition to the DC58. It was really simple to install - unfortunately for me I had to install onto a stud wall but finding the studs was easy as I have a stud finder.Two simple screws later and feeding the power cord into the dock - simple as that.The quality is very sturdy - no issues with the spring strength at all. I was a little dubious if this is genuine Dyson but it does seem to be, although the instructions look like they were printed on a home computer and the box was a plain Dyosn brown box. So not sure...Overall pleased with the purchase - just hope it doesn't fail if it is a fake product.
18.7.2014
The wall mount is made with the same precision and attention to detail as the Dyson vacuums. Contrary to some reviews on other suppliers items, this mount is fully compatible with the DC58 Animal handheld and DOES provide the docking station charge facility; the wire is fed through the back of the mount and the male plug clicks into the holder. Just place the DC58 into the cradle and its automatically plugged in and charging. Took mere minutes to fit and thoroughly impressed. Has two sockets for the removable tools. Just need another wall mount for the toolkit devices also purchased at the time!
3.8.2016
Bought this for my DC58.This does not come with a plug so you need the one that came with your Dyson, there are pre molded holes to wire the cable through and keep it tidy. Attached this to the shoe rack in our passage. Fits the DC58 nicely and the attachments in the two additional holders.Looking at the picture on here looks live ive fitted ours upside down (the plug is at the top and the attachments are at the bottom) Works perfectly fine, doesnt seem to put any strain on any of the parts like that and means i can store it with the extension pole (bought seperately) attached for tidyness.
12.4.2020
We used to keep our V6 on top of the fridge and just pull the power cable out when we wanted to use it. The missus then wanted a long bar & head attachment, so I thought there must be a mount out there for it all. I brought this one and it does everything I want. The rear of the V6 slides into a slot (where the power wire goes), which folds back into the unit and holds the whole unit in-place while charging. The long extension pipe clicks in place (vertically hanging down) in one of the two holders underneath and so does the thin suction attachment which came with the V6. Absolutely perfect!
28.11.2016
Just like I have read a few people on here have done, I installed ours upside down, according to the instructions that came with it, which I am sure are incorrect. installed the way of the photo to the side here the spring is not strong enough to hold the machine in place, so it falls out, sliding the tail of the vacuum up into the socket then pushing home, it holds perfectly as the weight of the machine is required to secure it in the clip.Maybe it was just my unit but try it before returning if you have same issues following the Dyson instructions
20.3.2018
Very pleased with this spring loaded bracket. There is a groove in the rear specially designed to take the cable so that just the right length is left at the top of the bracket to connect to the machine. I wouldn't call it a docking station as you do have to connect the lead to the machine and remember to disconnect it when removing the machine from the bracket. But it's not a problem. My daughter has a Dyson which was supplied with a docking station, her machine automatically begins charging as soon as it is placed in the station.
18.7.2015
Great price to add this to my Dyson Dc58. I realised that the same Dyson vacuum seems to be marketed as different versions and the only difference being the attachments. So having bought mine, I wanted to fix it to my wall and have somewhere to store the tools. This arrived, is the proper Dyson part and was easy to fit. I now have Dyson always charged and ready for when I need it. Both of my smaller attachments fit onto the two holders with the powered attachment remaining connected to the Dyson! Very neat.
4.9.2016
This product would be even better if it included an inbuilt method of storing excess cable.It's fine as it is if the nearest power socket is say 50cm to 1 metre away, but I have a situation whereby it could be mounted on the wall close alongside an existing socket in a walk-in cupboard.Looking at the design I reckon Dyson could have produced a moulding that might accommodate a good deal of this 'slack'?Yes, I know there are various cable tidy options available.
21.10.2018
I've read a lot of reviews for this complaining about poor design, things don't fit or work perfectly. And whilst the only very very minor thing I noticed was that the DC plug itself needed a minor adjustment inside the bracket to ensure it made the correct contact to charge, otherwise I see no reason to complain about this at all. It works perfectly, is incredibly easy to mount and once in place makes charging and using the V6 incredibly convenient.Recommended.
17.11.2018
This wall bracket really helps my Dyson. You simply curl the existing charging cable around the back and through a hole and then the Dyson can slot into the spring adjusted charging port. There are 3 holes to drill the unit into a wall and the plastic is of fair quality, although I would not want it to take a hit but it does the job.Overall+ Easy to install+ Keep Dyson tidy while chargingI hope you found this review helpful :)
11.1.2019
Call me sad but there’s something satisfying about finding a product like this.It’s cheaper than from DysonIt’s the same thingThe charging wire has a beautifully snug little holster (am I Peter Kay’s mum?!) that then snaps into the top.The motion of loading the Dyson into the hinged bracket and it automatically attaching to the charger is a thing of beauty and wonder.There, I said it
4.2.2018
I love this gizmo, simply does what it says on the box. Fits perfectly and has two docking slots for attachments. the only issue i had with it is that the power cord socket sometimes doesn't charge the vacuum machine if it is not perfectly slotted in thus nits worth confirming that the light has come on before leaving the vacuum machine in it. this only happened three times in 2 months.
23.12.2016
Very prompt delivery and it was so easy to fit. Its a case of drilling 2 holes and running the power cable along the guides in the back. Once it is fitted you simply clip the Dyson into it and the power lead goes into the handle charge socket , Note,, the picture does show it the wrong way round and the 2 slots for the attachments goes to the bottom