logo

Info


Reviewbucket.co.uk scanned the internet for Wera Big Pack 300 reviews.
You can find all Wera Big Pack 300 reviews and ratings on this page.

Read the reviews.

Analysis


For Wera Big Pack 300, 69 customer reviews collected from 2 e-commerce sites, and the average score is 4.9.

Detailed seller stats;
Amazon has 66 customer reviews and the average score is 4.9. Go to this seller.
Ebay has 3 customer reviews and the average score is 5. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

11.4.2016

OK Wera to start with theses things.. (soz, I had too lol, doesn't matter Wera you're from, a bad pun is the best pun).I am a qualified heavy diesel/ tracked vehicle mechanic that packed it in after a bad motorcycle accident. I'm currently a truck owner/driver but I still fix my own motorbike, car, lorry and I do a lot of DIY so I am still active and I use just about every tool I buy. Currently I'm the process of renewing my ageing tool collection and have spent a fortune on Snap-on, Knipex, Norbar, makita, dewalt, ingersoll rand, etc. I came across these due to an actual Snap-on rep telling me about them (I had told him to his face I wasn't buying any snap-on driver unless it was a ratchet driver),he was quite adamant that Wera drivers are the best on the planet alongside Wiha. He then went into detail about how Klein, snap-on and PBswiss had not refreshed their screwdriver technology in decades and that all three of their current line-up stood absolutely no chance against Wera when It came to shaft and tip strength. I then asked about them on some of the classic truck forums and motorbike forums I joined and just about every coachbuilder,mechanic,tuner and even the admin replied saying the same basic thing> "buy them with confidence". At this point I googled the price and found them to be seriously cheap for an item that's touted as "one of the best, if not thee best". After a few good youtube review vids I ordered the big 14 pack of these kraftform 300, the big 14 pack of the VDE http://www.amazon.co.uk/Wera-105631-Kraftform-Piece-Screwdriver, the Chisel driver set with the 1/4" drive http://www.amazon.co.uk/Wera-05018283001-Chisel-driver-square-drive .. and the Long Shaft set http://www.amazon.co.uk/Wera-347735-Kraftform-Screwdriver-PiecesAll 36 drivers cost me £110 compared to £120 that Snap-on are asking for an 8-piece set. Yes. eight drivers!!As of right now, I have rigorously tested this 300series out and they left me smiling. My findings>>>**SCREW-HEAD FIT: I compared them to my older British made drivers and the Wera are on a completely different league, they also fit our European screw heads way better than the 90s built snap-on stubby ph2 and flathead screwdriver that I have (which were specifically designed for European made screw heads by snap-on Eurotools). They feel more snug than any screwdriver or bit that I have ever used in my lifetime and they have yet to cam-out on me on any screwhead to this day. They remove purposely rounded screwheads for fun, no doubt due to the lasertip etchings combined with the tight fit.**THE HANDLES: Weird looking and feeling at first but ultimately they are extremely functional and they don't roll away. They allow for insane amounts of torque without feeling like they will slip out of your hand or distort/break off. The three stage handle design seems to give insane levels of torque even if you are just fingering twisting the top of the driver.**THE SHAFTS: The smaller Wera drivers actually twist and bend less than the larger diameter shafts on my older ph3 drivers. Even the smallest flathead (0.6x3.5) the shaft is Unbendable with my full twisting strength. I'm 6ft2" and 98kg so that's about all I need to say on the matter.**TIP STRENGTH: Indestructible!! totally indestructible in normal use. Decades of automotive abuse might just about wear the Laser etchings out. Stronger than PH3 blue point 1/2" drive socket..Tested!As you can tell I'm a total Wera fanboy now so here is a few handy tips for using them.-Buy the Wera star magnetizer. http://www.amazon.co.uk/Wera-05003300001-Magnetising-Standard-Screwdriver/dp/B000XIZN9C?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00They DO NOT come magnetized. The Wera star does the same thing as any magnet but its shaped so the driver can be rubbed on the critical parts. It does the same job as any old magnet but It does it quicker and it has a ceramic feeling finish so it apparently wont rub the finish off your shaft or tip. It's a demagnetizer too so it can be used to clean all the shrapnel off the tip by simply waving the screwdriver tip past the back of it. Its only cheap so I added it up and I'm glad I did just for its magnetic cleaning properties. Shrapnel sticking to my tools is a pet hate of mine.-Don't waste your time putting any pushing force into these drivers. The laser tip allows for practically no pushing force and it still wont cam-out even on a rounded head. I found I had to put a fair old bit of pushing force into my older screwdrivers to get them to even grip 2nd hand screwheads. These drivers can be treated as self-gripping.JOBS DONE!!! 10/10 Wera you legends!!
Read more..

22.3.2018

I'm not a tradesmen or anything like that but was fed up of cheap tools. Decided to treat myself to these and glad i did. Even the box they come in looked really nice. The quality is amazing, i have several WERA products now and have always been happy with the quality of there tools. These are very comfortable to hold and use.The bite on them are great and have tried them on several badly damaged screw heads and they make light work of them. The difference is very noticeable if your are used to using cheap sets, you would't think they could make doing a job so much easier. Fantastic quality, will never buy cheap again, at this price and my light usage i imagine them lasting many years to come.I also bought there chisel driver set and again very good quality, once you use these you will not want a cheap set again. Mine are in a tool bag but the racks come included for those who may want to hand them up in a shed or garage.
Read more..

6.11.2014

This is a pretty decent kit. The quality of the tools is top notch, from handle to tip. The included holders are decent too, i immediately bolted them to the outside of my toolbox. However the selection is a bit lacking. I like the fact that the kit includes both Phillips and Pozidriv drivers, and that they're clearly identified right on the handle. But I wish more flat-head drivers had been included. There's only 2, a small one and a slightly less small one. There's a better selection of Torx drivers, most of the sizes I need for working on my Audi, which is especially nice.Just ONE more flat-head driver (a large one) would have gone a long way towards improving this kit.Two more flat-head drivers (medium and large) would have made it perfect. As it is, it's strangely lacking, so I'm docking a star.
Read more..

3.11.2016

I've been using Wera tools for the last ten years.I first found Wera in Screwfix. Eventually they stopped stocking them and I turned to Amazon to renew my trusty tools.I renew my drivers every six months. Some would say it excessive but I only need to round one screw head and the hour removing the rounded screw would far outweigh the cost or renewal.the weight, comfort and reliability make these drivers the perfect hand tools for myself.I'm a engineer by trade and my hour labour rate is slightly less than the cost of these keys. The last thing I want a customer to see is me fumbling with cheap tools.I was once told a poor workman blames his tools.This in part is true BUT have you noticed all the best workmen have the best tools?I'm a best workman....
Read more..

19.4.2019

I have bought the big 300 screwdriver set (green) as well as the chisel driver set (yellow). I have to say that at this price bracket their quality is superb. Having tried Wiha, Stanley, Halfords pro, Bahco, CK and even snap on, I have to say these are my favorite set. The ID markers on top of the green screwdrives make them really easy to identify. Good selection of phillips, pozi, flat and torx. The handles have a great grip to them and if you get them really dirty, just wipe them down with a rag with a bit of WD40. Some reviewers have commented about the tool holders being useless but mine work really well at keeping them wall mounted and organised.

14.6.2015

This is my first set of Wera screwdrivers as previous other branded sets I have brought have broken on the Philips screwdriver heads.These seem pretty robust, nice to hold and easy to grip.Would recommend highly for anyone that uses screw drivers a lot.I read a lot of reviews before purchase for various sets and it came down to these or the Stanley fatmax (Which are slightly cheaper). I decided on these purely on the mix of screw drivers supplied and the reviews I had read across the web.

3.5.2017

I bought these because I was so impressed with the Wera Allen Keys I bought. I was not disappointed and again with their laser etched tips they grip the screw properly without damaging the screw or the driver tip. A lot of thought seems to go into Wera tools along with excellent build quality. They are comfortable to use and you can apply ample pressure without the tool slipping. I think my Snap On set will become redundant. Excellent tools for a lot less than Snap on

13.11.2020

Brilliant set of screwdrivers! I've been using the chinese cheap drivers for waaaaaay too long.....time for an upgrade. No regrets getting this excellent kit. These lasertips bits grab any screw by the balls! No more stripping screw heads. Unbelievable price for a good set like this on Amazon!Embossed on the handle is the year of manufacture (pic) At least i know how old is it over the years to come.Included in the box is a sticker (pic), that's going on my guitar!

29.9.2016

We use Wera at work, and the 4mm flat we have is in much better condition than it has right to be. That poor driver gets used for twisting, prying, scraping, poking, and if it's lucky it'll occasionally see a screw! Yet still it hangs in there like it's made of unobtainium or something...After using Wera drivers at work I decided it would be rude not to get a set for home. This is a great set, and for the quality of the drivers is an absolute bargain.

29.11.2017

Love these screwdrivers! I debated for a long time whether or not to buy these but the glowing reviews by others led me to make the final purchase, what was I waiting for?!? As soon as they arrive you can instantly tell that these are superior to other screwdrivers. I have used them every day and they haven't cammed out once, they just bite each time. Whilst you can definitely find cheaper alternatives, you definitely get what you pay for.

23.6.2016

With hand tools you get what you pay for. I've had some of these drivers in daily use for 15 years and I reckon there's the same life left in then. Pro quality tools that will last, you'll never have to buy a set again. I keep mine on a chisel roll in my toolbox ready to go, keep the ends from getting bashed and always to hand.

17.5.2014

Installing a wooden batten using 2" screws and my screwdriver shattered.Paid about £30 for a set of twelve five years ago.Looked at reviews and bought these, straight away I can see the difference in quality, these are much better.Looking at my other screwdrivers and comparing them to Wera, I am going to replace them all.

4.7.2017

Good set of drivers. Time will tell how long they last. They do feel good in my hands though.As for selection. There's more variety in torq drivers then there is for the slotted flat drivers. There's a sort of a big one.l, then there's two tiny ones 3.5 & 4mm (if I remember correctly) needed another size.

27.10.2020

I've got a lot of Wera stuff and my usual comment is, yes it's very nice, but it's expensive for what it is. This set, however, is excellent quality and pretty solid value too. There're cheaper screwdriver sets, but this is worth the extra if you're a professional or just use your tools a lot.

5.11.2016

Buy nice or buy twice. In an effort to start buying tools that would outlive me I went for these excellent German made screwdrivers. The laser etching helps and they just feel quality in the hand.No damage to them yet, mind you they are so nice I'm not using them as prying tools or darts.

List All Products

Terms and ConditionsPrivacy Policy