Wera 2035 - Reviews
(4.7)
357 reviews
Info
Reviewbucket.co.uk scanned the internet for Wera 2035 reviews.
You can find all Wera 2035 reviews and ratings on this page.
Analysis
For Wera 2035, 357 customer reviews collected from 2 e-commerce sites, and the average score is 4.7.
Detailed seller stats;
Amazon has 344 customer reviews and the average score is 4.7. Go to this seller.
Ebay has 13 customer reviews and the average score is 5. Go to this seller.
Detail
Similar Items
14.10.2014
Wonderful screwdrivers as you would expect from this company. Buy with confidence. BTW excellent support from the company, I can vouch for that, if you need anything or any information, just ring them up and they will solve your problem.The grips are first class, they fit your hand to give you the maximum control and grip. The tips are precision ground to high tolerance figures which ensure a close fit to the screws to prevent damage and the sizes are marked on each driver. The complete range covers every conceivable size so you can be sure of having the right driver for the job. They are very robustly made from hard wearing materials, just like all the other tools in the Wera range. If you lose one,
11.10.2020
Been searching for the perfect screwdriver for socket faceplates and terminals for a while now. The search may be over!Tip size has proved perfect so far, big enough to fit across the whole slot in the grub screws (MK type faceplate) yet the shaft is slim enough to access the tightest of recess. The Swivel cap enables you to apply pressure with your palm while quickly twisting the screws with your fingers. I would've preferred a bigger flare out, to get a hold of, at the base of the handle, but the hexagonal profile, low down, does help for when you need that extra grip.Wera's typical build quality is evident here. The tip has withstood some abuse already with no signs of damage.
4.11.2020
This is a lovely set of screwdrivers.... to be quite honest I have spent tens of thousands of pounds on hand and engineering tools in the last 50 years. I have wealth of experience of buying those expensive hand tools from America ( don’t think lm allowed to use the name of the make) the ones in the flash red boxes, you know the ones!Well I have to say I was faced with a model steam engine with 1/8” diameter finisher head screws but with only a 0.014” width slot, and I had dozens of them to deal with and they had to left in exhibition quality order without any burrs what so ever!Needless to say this set of screwdrivers did the job exceedingly well, I just stoned down the broadest blade to 0.014”.
12.6.2021
I wanted a Very High Quality screwdriver & that's what I got ??I purchased 3 of these German screwdrivers, I had a Nikon D3X Camera & two lenses to repair, they fitted the tiny screws without any damage to the screw itself or the screwdriver, as as a retired Aerospace Defence Electronics Hardware Engineer I wanted the best in quality which is so important to get the right quality fit tool for these tiny screws on my Camera, without the right tool you can damage things beyond repair very quickly, now that it's repaired & all back together I cannot tell if it's ever been opened,Pay that little bit more & get the best tool to last a lifetime ?Fits well in the hand,
9.1.2013
These tools should not be confused with the smaller versions that are often described as 'jewellers' screwdrivers'. These are mid-sized tools and intended for electronic equipment of all types and anything that uses the smaller, but not smallest micro-sized, screws.Provided on a self-standing support, the screwdrivers are secure only when nearly vertical but the tray is unsuited to horizontal use. Five of the six have shafts of identical length bu the smallest Philips head driver is also the shortest. The end caps of each driver rotate freely such that the tool can be 'spun' when needed. They are also slightly convex and are comfortable in the hand.The tips are all of black steel and should
8.3.2020
I like tools. I buy far too many.Unfortunately, a lot of them look pretty, but are barely used. In some cases, never used.This set of Wera screwdrivers are the opposite. (Although when viewed in their supplied holder, they do look very attractive)They are the tools I use more than anything else. I do a lot of electronic repair, and these are my go to drivers, everytime.I’ve had them over 3 years now and the tips are as good as the day I bought them.They truly are the one set of tools I couldn’t do without.The spinning head in your palm makes such a difference to speed and comfort in use.At under £ 3 each, plus a stand,
21.5.2013
Being a fairly new convert to Wera screwdrivers, I was looking for an accompanying set of screwdrivers to my "normal sized" Wera Kraftform 300 set. It is slightly irritating that the stand (even though it's identical in every other way) is not designed to be wall mounted like the "wall rack" for the 300 set, nevertheless I have attached it to the wall using screws through the screwdriver holes with the aid of a couple of washers.The screwdrivers themselves are very nice to use, a surprisingly handy size fitting in-between micro "glasses" screwdrivers and normal sized heads. Apart from the "stand not wall rack" issue, a nice complement to the Kraftform 300 set.
23.6.2018
I always get Wera or Wiha scredrivers if I canOnly if I can get a good deal on them thoughAs they are ridiculously expensiveBritish tools were at least the equal of GermanUntil the late 70s greedy businesses and Thatchers government shut them all and moved them to ChinaEven subsidising them to close factories, unbelievably.Now almost all of them don't exist anymore as people wouldn't buy 3rd rate badly made Chinese made "British" toolsAnd bought German instead which is why the Germans wouldn't follow Thatchers spite and idiocy destroying their own manufacturing baseWhich is why even the few tool makers still around UK get their stuff made in Germany
24.6.2019
I have used Wera hand tools for some time and they are very good, but rather expensive. They are durable, have good geometry, and fit hand well. The rotating nob at the bend allows you to press and turn at the same time.These screwdrivers come in a sort of caddy thing which doesn't hold them very tightly and takes up a lot of room. I don't see much use for it and it doesn't have any recycling information which isn't very good.Apart from that the packaging is good - the box is folded and tabbed, not glued, to improve recyclability. The caddy should be sold separately. I don't want it.This set covered my needs for PC and small electrical device repair.
6.8.2018
1.2mm flat blade or slotted screwdriver. Great quality and value for money. Purchased for the interest and hobby of watch keeping. This 1.2mm size is the size that fits Isofrane buckle screws and also other brands too. It's important to use a good quality screwdriver of the correct size so you don't ruin the screw head and leave it looking all messed up. These are far cheaper than many watch brand screwdrivers which can cost atleast £15 each. These are cheaper than the spare tips for other brands. Unless you're a professional jeweller or own a Rolex then these Wera micro screwdrivers will be fine.
7.6.2020
After using and loving other tools from the Wera range i needed some small screwdrivers for maintaining the equipment in my workplace. These micro screwdrivers have a really long blade length that makes it very east to remove the small fiddly screws that are buried dep within the equipment that short blade micro screwdrivers struggle to reach, these have same me in quite a few jobs that used to frustrate me no end due to not being able to get to the screws due to their location underneath other piece of equipment that was being removed. Nice addition to my growing Wera tool collection
3.3.2019
Using these to dismantle and reassemble a saxophone, which has many very small slotted screws and slotted rods. A selection of these screwdrivers fit well and due to the length of the shaft and style of grip are convenient to use. ( I have found many jewellers type screwdrivers to short and therefore awkward to use.) They are also hollow ground which is important to avoid opening up the slots on the fine screws.Come with a handy little stand but are a bit expensive hence four stars. I would recommend them, it is cheaper to buy them as a set like this than buying them individually.
2.2.2014
I have lots of other wera screwdrivers in slightly larger sizes (2mm upward), and needed a small driver for jewellery.It's just as good as the other wera drivers (i.e., a remarkable step-up in quality from the generic silver precision drivers), but the flat tip has slightly twisted already after only 2 uses.I think this will be inherent with every tiny screw driver, so it would be better to view them as disposables rather than long-term investments.Conclusion: good, but not much of a long-term investment, as the larger Wera drivers are.
27.11.2014
How many times have you tried to find a screwdriver for a fiddly job and either the end chews up the screw head or it won't fit?This has happened to me loads. So this set is a godsend. I bought it as a "just in case" stand by, but I have already found one of the screwdrivers useful.I have a keyring torch with an LED bulb for which I have lots of spare batteries. The battery needed changing and one of these was the perfect size.They are excellent quality and do not chew up the screw head.I am so glad I bought them.
30.12.2017
Can't really beat the quality of Wera tools, these are lovely, fit snug with crafted tips. I even spent £40 plus on a ratchet Wera multi bit screwdriver to recently build a computer, glad I did, the saying is true, you are as good as the tools you use. Proper quality tools give you confidence and high success rate in what you do and this little hex screwdriver is a welcome addition to my Wera tool range. Using for coil building in my Aromarizer V2 Supreme and it fits grub screws perfectly.tj