Metabo DH 330 - Reviews
(4.8)
37 reviews
Info
Reviewbucket.co.uk scanned the internet for Metabo DH 330 reviews.
You can find all Metabo DH 330 reviews and ratings on this page.
Analysis
For Metabo DH 330, 37 customer reviews collected from 2 e-commerce sites, and the average score is 4.8.
Detailed seller stats;
Amazon has 14 customer reviews and the average score is 4.8. Go to this seller.
Ebay has 23 customer reviews and the average score is 4.9. Go to this seller.
Detail
Similar Items
28.2.2016
Fantastic machine. Very well built as expected from Metabo. Chip extraction connected to a Dyson is fantastic, virtually no mess left even when planing at around 120mm height. Was a bit worried Metabo indicated the use of an industrial vacuum was necessary in order to have good chip clearance, my little Dyson (DC19) works fine with plenty of suction, just needs to be emptied a bit more often as the chips do accumulate quite quickly. Finished surface (on white oak) was simply brilliant, super smooth with no tear out. and absolutely no need for any sanding. Just have to be a bit careful feeding in as the rollers grip the workpiece and pull it through,
31.12.2015
Been after a thicknesser for a while..the Makita is good, but i wanted that little extra width. I bought the DeWalt which was really under par for a DeWalt... And a lot of money. I returned it because it wouldnt feed properly. This Metabo was over £100 cheaper and is a superb piece of kit! Cant find a single fault with it. Feeds perfectly, fine adjustment, it has a lock on the spindles to prevent varying cut depths. From the price to functionality, 10/10!!
18.5.2016
I looked at previous reports which came out very well. A very sturdy machine with good control . the thickness gauge works well along with the thickness of the cut. I did not take this to its maximum, better a few more thin cuts. once you get used to fitting the dust collecter it workswell . I am pleased with the machine But read the Instructions first!
24.11.2020
Easy to use, easy to set height, works as it should. More noisy than expected. Worst feature is poor chipping/ extraction cowl, this is nasty plastic and flexes and pops out from retainers when connecting hoses, which i have to do every use. Machine works as it should and gives a good clean finish to the surface.
27.9.2017
For a bench top machine this exceeds in performance. I have used it to plane 10" x 4" spars up to 8' long. It has performed admirably. Blades are expensive but for the challenges I have presented this machine worth it. Don't be afraid to to service this machine regularly.
25.4.2021
Great wee machine. Easy to setup and use but the extraction system is crap. The plastic tube gets blocked so easily the shavings just fly out the front. Need to come up with something better but it'll do the job easy.
13.5.2020
No anti kickback fingers as in my old RyobiQuieter motor though and nice rigid mounting for power head.Not sure about the rather thin knives and retaining mechanism but time will tell.
19.4.2020
If your looking to purchase a thicknesser I would recommend you take a look at the Matabo it's well priced an a great bit of kit does a good finish on your wood and is nice and compact
10.1.2016
This is really good quality machine for a good price. I am satisfied with the quality of planing. I work with beech that is hard wood ,and machine picks up perfectly.respect to seller.
20.4.2020
Only used it a few times but so far this is a great machine.Going to save me a lot of time and improve my woodworking.It is noisy though so make sure you use ear defender ??
4.12.2019
This is a seriously good thicknesser and replacement blades are easy to come by at an affordable price, has served me well until I moved on to a combination thicknesser/planer.
15.12.2015
Price performance is very good.She works up really well into the wood. The planer is also working very closely!I would buy again!With the seller, I am very happy!
3.11.2016
After many weeks comparing different makes of thicknessers and settling on the Metabo. I thankfully made the right choice; can't fault the machine.
16.4.2020
I was in a pinch with work and needed the tool ASAP and it was here within a couple of days!! Pulled me right out of it!
16.9.2018
ottima macchina.ben progettata.istruzioni molto chiare.ottimo rapporto qualità prezzo.