Brennenstuhl 12704 - Reviews
(3.5)
87 reviews
Info
Reviewbucket.co.uk scanned the internet for Brennenstuhl 12704 reviews.
You can find all Brennenstuhl 12704 reviews and ratings on this page.
Analysis
For Brennenstuhl 12704, 87 customer reviews collected from 2 e-commerce sites, and the average score is 3.5.
Detailed seller stats;
Amazon has 81 customer reviews and the average score is 3.4. Go to this seller.
Ebay has 6 customer reviews and the average score is 4.7. Go to this seller.
Detail
Similar Items
20.12.2020
First off, this is an EU style product so it has no instructions and has push-fit wiring so if you’re not confident with wiring it yourself, look elsewhere.Because it’s push-fit, it’s easier if you have solid core wiring or you put a bit of solder on the end of twisty wire, but I did it perfectly well by twisting the wire tightly and pushing it in. I’ve also wired it up to a 5 amp plug just in case.It was very easy to fit and looks great in a small space for added light in my loft and is good VFM.
21.7.2020
A simple design, the light wants to install on flat solid core T&E, trivial to fit if you do use T&E. It is also easy to join the lights together using T&E. There is an annoying problem with the "glass." It is far easier to part assemble the light in place and then slide the light in to a partially closed assembly. There is no earth peg.
28.2.2021
It's cheap but does the job. I'm a different and i used 3 core cable UK, cut the nib off the insertion hole on the light,push through cord, left is blue twist wire as much as possible push in to the left hand side opening right is brown I taped the earth to the inside I wound electrical tape around to secure easy enough.
23.10.2020
I was puzzled by the lack of screw connectors but eventually worked out they were push fit for 1mm cable. I added some connection strip to allow me to connect a flex. Well insulated and there is no connection between the cage and the plastic interior so I am happy with the absence of Earth terminal.
28.6.2020
Easy to install but be warned these are push fit for hard wire only not the the twist wire type you would have trouble fitting it with soft wire. It is made of plastic but you pay for what you get I’m using in my basement so perfect. I think if you over tighten screws it would brake
19.10.2020
Can everyone stop complaining about a lack of earth. A plastic enclosure doesn’t require one. Make an earth off in a terminal block if you must but please stop commenting on itIf you’re not a qualified electrician you shouldn’t be installing it
9.2.2021
These are best used with electric cable with a solid wire core rather than twisted wires. Once you know that they are fine, easy to use and paired with an LED bulb are perfect in my roof space.
24.1.2018
cracking price, installed outside and they seem pretty weatherproof. I would say though, the the cables are pushed into position, not screwed. a little odd but they seem secure.
9.5.2017
The push-in connections are a little tricky. They are solidly built units and are easy to handle and install. You won't find these in the shops under at least twice the price!
2.6.2020
At the price these are you can't ask for more. But be careful when installing do not overtighen the plastic feet as plastic is fairly brittle.
9.11.2020
Good lights. Good quality and fairly easy to fit for a diy. Replacements for older ones.Use standard size screw bulbs which I also bought.
12.8.2016
This is far from the prettiest light.However as long as you're not after beauty, this is a very cost effective functional exterior light.
11.8.2020
It is plastic and glass, so not sure how long it would last if in direct sunlight, mine I fitted in the shade of a porch and does the job.
19.4.2017
Good product. Requires some work on each light if linking as driveway lights, but should be well within the scope of average DIY'er.
31.1.2021
With lockdown it was the time to sort out the loft.These little beauties were just what we needed.Now we can find everything.