logo

Info


Reviewbucket.co.uk scanned the internet for Wera 932 AS reviews.
You can find all Wera 932 AS reviews and ratings on this page.

Read the reviews.

Analysis


For Wera 932 AS, 115 customer reviews collected from 1 e-commerce sites, and the average score is 4.9.

Detailed seller stats;
Amazon has 115 customer reviews and the average score is 4.9. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

13.5.2014

Hexagon shaft blade thru handle. Can be gently struck to free screws with painted or burred slots. 12mm wide flared blade. 2mm tip thickness. Tip is shorter than usual. One component handle, not soft two component, easy to wipe clean. Strong, sturdy tool made in Germany by Wera. The Wera Catalogue states that some of the screwdrivers in this range have single component handles, which are the larger sizes available.Vessel screwdriver, dedicated chisel screwdriver information:No 970 MEGADORA chisel-type screwdriver. Made from high grade chisel steel. Tang thru shank with large end cap. Tile and brick chipping. Metal end cap for hammering. This is a chisel screwdriver and cannot be used to turn screws.Blade tip is sharp like a bolster chisel with two bevels. Photos; Padre 12mm cold chisel, roughneck claw hammer anti-vibe. I have bought many sizes of Padre cold chisels, roughneck anti-vibe, 16 ounce, claw hammer for chipping; masonry, plaster and render from amazon.co.uk. I do strike my expensive Wera slotted screwdrivers, only to remove paint filled, slotted screw heads or burred slotted screw heads so they can be removed easily.
Read more..

12.11.2016

This screwdriver has to put up with very rough handling from my side. The last one (I lost it unfortunately) had been with me for 10+ years being treated as a tool. One of the first things I did with it was chopping a 4" Nail and there is no mark on the blade to see. I have fallen in love with the Wera screwdrivers. For daily use I am using the stainless versions as they are very universal. For the rough bits of work it has to be the Kraftform Plus for me. And on the electric side there are the VDE versions. I tried other screwdrivers but split handles, worn or damaged blades made often very quickly an end to these attempts. Most of the time I only have to replace a Wera screwdriver as I lost it somewhere.And even the stainless ones being in constant use are lasting years and never leave rusty marks.
Read more..

6.12.2017

This is definitely one of the best screwdrivers available. I’ve been using both this Chiseldriver and the lasertip version for years. Both are great. This Chiseldriver is the tougher of the two, because of its 'Thru-Tang Blade' that means you can hammer it to loosen screws if required. However, PB Swiss still has the edge for slotted screwdrivers.Pros: Very comfortable in the hand. Ergonomic. Long lasting. High quality. Very tough!Cons: I’ve found PB Swiss definitely has the edge over Wera for slotted screwdrivers. The PB Swiss equivalent is the Heavy Duty SwissGrip screwdriver, which also has a thru-tang blade (PB 8102 D Series). If you need a slotted screwdriver,then PB Swiss is brilliant because the unique ‘parallel tip’ reduces cam-out. It's surprising how much difference this makes.
Read more..

21.5.2018

I am a fan of Wera tools, so knew the quality would be great a usual.Was caught out by the size of this beast or a driver. Thought the 200 mm was overall length, that is actually blade to start of handle. Total length was a little over 300 mm. The blade (head) is a perfect fit for the roofing/gutter bolts I use day to day for fixing down electrical containment, extremely snug fit and gets a very good tightness. Just feel sorry for the person that may need to under do it in future years. It is a nice feature to be able to get a spanner near to the handle to help with untightening stubborn older screws.Overall a robust screwdriver that I recommend,haven't had the heart to smack it with a hammer yet though far too shiny.
Read more..

6.12.2017

This is definitely one of the best screwdrivers available. I’ve been using this Chiseldriver and the lasertip version for years. Both are great. This Chiseldriver is the tougher of the two, because of its 'thru-tang blade' that means you can hammer it to loosen screws if required.Pros: Very comfortable in the hand. Ergonomic. Long lasting. High quality. Very tough!Cons: I’ve found PB Swiss still has the edge over Wera. (The PB Swiss equivalent is the Heavy Duty SwissGrip screwdriver, which also has a thru-tang blade.) If you need a slotted screwdriver, then PB Swiss is brilliant because the unique ‘parallel tip’ reduces cam-out. For a Philips screwdriver, however,then there's not much in it between PB Swiss and Wera.
Read more..

22.9.2014

Usual high quality from Wera, The smaller drivers have the dual density yellow/black handle. This has the single density large black handle. This does not affect the grip due to the size. The handle has a larger hexagon bolster to put a spanner on for leverage. The handle has a steel cap fixed to the top of the screwdriver so can be hit with a hammer, very useful for stubborn screws.I find generally find Wera top notch tools and would recommend them to anyone. Wera are also very helpful should you have any queries/problems, a great company.

17.7.2019

I am a joiner and often have to remove tough, old slotted screws in doors and window frames. These drivers are great as you can give the driver a few taps with a mallet while turning, which often helps to loosen the screw. I have had Snapon drivers in the past and can say the quality of these Wera drivers is just as good, for a much lower price. They will last you years as long as you don't use them for jobs you would use a crowbar for. They will lever and chisel within reason though.

17.2.2018

Perfect for a wide range of tasks as it’s strong and well made. Feels great in the hand. I use it for industrial electrical installation and it’s perfect for levering big armoured cables. The tip is actually a little wide for roofing/gutter bolts but I carefully thinned it out with my angle grinder. The metal cap is also useful to use as you don’t damage the handle! Also did I say this thing is a beast!?

18.10.2016

This is a beast of a screwdriver, it has taken everything I have thrown at it in its stride from removing tiles and grout to prying out a wedged metal plate. This Wera range of screwdrivers are excellent quality and have a lovely feel to them, you will not regret buying this as you will use it for so many different jobs and you'll be glad you had it in your toolbox.

7.12.2018

Good quality solid screwdriver to enabling you to use with a hammer or spanner if needed. it is also good to use in the hand and you can use it instead on messing up your VDE screwdrivers on non-electrical items, saving VDE screwdrivers for what they are to be used for. good general purpose screwdrivers, ideal for strip down maintenance of machinery.

22.1.2017

Total overkill for adjusting ski bindings, but an utter joy to use. Comfortable handle and broad tip means no slips and no scratches or 'tool tracks' on bindings. Built like a tank (though with rather more finesse). Great value for money and will still be going strong long, long after I've shuffled off.

16.4.2017

This is a great screwdriver even after endless hitting with a lump hammer has stayed like new. Not much to say other than it's hard wearing and the quality is excellent as you would expect from wera. Only improvement I would say is the handle grip can become slippy once it's wet.

26.5.2020

Were is the tool choice of the Maverick, the tool that nobody questions as once you have used Were you are sold on them. Chisel drive is an important part of the arsenal for me, along with a wrecking bar, caravan and motorhomes are stripped with wild abandon.

18.10.2020

Wera make great screwdrivers and this one is no different. I have used this driver, almost daily since i received it and its still looking as good as new even after repeatedly hitting hit with the hammer to free tights screws

12.8.2016

Very high quality,i have never seen better craftsmanship.Soft grippy yellow handle bits,can get grubby but nothing soap and water can't fix.As to the working tool itself only got it today but will update on it's performance.

List All Products

Terms and ConditionsPrivacy Policy