Wera 395 - Reviews
(4.9)
156 reviews
Info
Reviewbucket.co.uk scanned the internet for Wera 395 reviews.
You can find all Wera 395 reviews and ratings on this page.
Analysis
For Wera 395, 156 customer reviews collected from 2 e-commerce sites, and the average score is 4.9.
Detailed seller stats;
Amazon has 146 customer reviews and the average score is 4.9. Go to this seller.
Ebay has 10 customer reviews and the average score is 5. Go to this seller.
Detail
Similar Items
21.10.2015
Every Wera tool I’ve seen or used has been top quality and really well designed, and these 395 series nut drivers are no exception (I’m also collecting sets of 1335 screwdrivers and 118 micro-screwdrivers at the moment). I’d originally intended only to get 8mm and 10mm nut drivers, but I liked them so much, and Amazon’s price was so tempting, that I ended up acquiring a full set from 5 to 10mm. I’m casting longing glances at the 13mm as well, although there’s a big price jump for sizes above 10mm.What makes these tools so good? The one-piece forged construction of the blades, for starters, and their satin chrome finish. The grippy, ergonomic handles feel just right in the hand, look good,
10.9.2017
This is a good value set of nut spinners from Wera. Typical handles that are on basically all of their screwdrivers etc, well made and feel comfortable. Made in the Czech Republic, German company.Theses are hollow to allow you to hold or spin nuts from extended threads etc. Handy thing when you need them and can of course be used for general tightening etc when large amounts of torque from a ratchet is not required.They come in a cardboard box though and do not have any holder etc like some screwdriver sets from Wera do.
6.12.2017
Bought for vintage radio repair. Although externally the sockets are slightly longer than most other brands, internally they're a bit shallower in both overall depth (e.g. Wera 1/4” driver is ~11mm deep vs Wiha 6mm driver @ ~18mm deep) and depth of nut fitting (e.g. ~5mm v 8mm) - which may be an issue if you have equipment with long threads &/or nuts. Apart from that, the fit & finish is excellent & I personally prefer the Wera handle style to the others. Good quality, and compliment my other WERA tools in my workshop.
27.1.2018
I checked out the reviews before I bought this affordable nutspinner that I used to tighten the nut screws on my guitar's headstock. It worked perfectly fine and I realised that two of my nutscrews do not actually tighten properly. So this little device may have saved my guitar from more serious long term damage. It has a nice grippy handle and seems to be made well enough, though I guess I haven't used it all that much yet. It's a good addition to my guitar maintenance toolbox.
16.9.2015
I was putting together a tool kit to keep with the generator, so I'd always have the tools I needed with it, without having to haul my huge main tool kit around with me. The nut that I have to undo/redo to fit and remove the earth lead is 10mm, and access for a spanner isn't easy as the nut is really only accessible from directly in front. Ordered this tool, it arrived very quickly and is ideal for what I need.
11.5.2017
Just what I needed to open and clean my (3) IBM Model M keyboards!It is very difficult to find a nut spinner in this size (5.5) and the ones found in "industrial" tool kits are just too thick to fit in a tight recess like the ones on my keyboards.It looks and feels well made, maybe a bit expensive for what it is but highly recommended for quality.
8.4.2021
This set would be amazing if all the sizes were covered!I purchased this set but then realised that some of the most common tap mini lock sizes are not covered. eg, 11mm & 12mm.I returned them as I didn’t want to have to have 2 different sets to cover my bases. Shame as like all Wera products, they are very well made and built to last.
16.10.2020
Worn 8mm phillips bolt on Honda tail light...no chance of a spanner or screwdriver getting it loose, the actual hole in the car is bit tight not the screw so its got worn.real headache when changing the bulbGot thisboom. ripped it off with no damagegoes 2 show, get the right tools b4 u try any DIY
17.4.2021
Arrived when due well packaged. Bought this 5.5mm nut spinner to aid in my work. Made from quality materials, is ergonomic, and with rubber pads it seems to give more purchase (than plastic handles). Definitely made my life easier at work and won't hesitate to purchase Wera products in the future
3.5.2019
I am a big fan of Wera Tools because i think the price you pay is very little in comparison to other tools if you consider the excellent quality. Those nutspinners are amazing cause they are hollow so even long screws or threaded bars are not an issue (not if they are too long tho)
19.10.2017
I bought this to take my IBM Model M keyboard apart, the bolt heads are recessed and a regular socket it too wide. This bolt driver is ideal because it is slim and can fit into a narrow recess with plenty of clearance. The product is well made and finished.
30.9.2017
Love these as they are easier than carrying around my socket set and as they are hollowed out they will fit over deep studs.These are great for replacing compressors (I am a refrigeration engineer) but can imagine they have a multitude of uses.
27.1.2018
and due to it's thickness it can fit even in narrow holes were screws might be in.In the past with other tools I had the issue that the outer walls of the HEX would be too thick, so the tool would not fit in narrower holes to grab the screw.
18.3.2019
I bought this to clean and bolt mod my IBM model m keyboard, and this nutspinner has been a delight to use. It's extremely high quality, I would recommend this brand and when I am in need of other screwdrivers I will look for this brand.
12.2.2018
A lad I worked with had these and I was jealous for quite a while. Had these a few days now and they’re just really handy. You can feel the quality in them and they’re surprisingly light!You can’t really go wrong with anything from Wera