logo

Info

Reviewbucket.co.uk scanned the internet for NZXT H210 reviews.
You can find all NZXT H210 reviews and ratings on this page.

Read the reviews.

Analysis

For NZXT H210, 120 customer reviews collected from 1 e-commerce sites, and the average score is 4.6.

Detailed seller stats;
Amazon has 120 customer reviews and the average score is 4.6. Go to this seller.

Detail

Click to list all products in this category.

Similar Items

18.1.2020

This is probably one of the best looking cases you can get if you're not wanting something that's really 'gamery' but still has some of the gamer features like RGB. The RGB strip and 4 fans all came preinstalled and plugged into the fan controller ready to roll. The 2 front fans look really nice through the darkened tempered glass and with the fan controller software can be customized to your own liking. Just everything about this case is visually stunning.There's ample space inside for your build as well. I didn't feel restricted at all in getting parts inside. There is plenty of options for cable management and the only cable that is really on show is the one that goes to the front of the graphics card,but considering where the socket is on the card this can't really be avoided. The cable is only on show for as much as necessary however and quickly disappears down a hole designed for cable management. There are runners on the back for guiding cables but these can be considered on the small side and to get something like the 24 pin power cable to follow it can be a struggle because of this. A little perseverance (and cable ties) goes a long way however and you can get it in there.I had some difficulty mounting a 2 fan AIO, it could've been my fault in choosing a corsair AIO over the NZXT one but the only place for mounting it is the front panel. I'm going off memory but I believe the front panel fans are 140mm, the radiator I bought suits 120mm fans so there was some mismatch that led to me having to bodge the AIO into place or replace the 140mm fans with 120mm. I opted for the bodge as 120mm fans look a bit out of place in the front. It's doable, just not as sleek as the rest of the case (though looks wise you wouldn't notice that it's a bodge).Some of the screws and thumb screws are on the course side of things as well, plus I managed to strip the head off one of the front panel grub screws so they are not the best. Overall though I'm more than happy I chose this case for my first build. It looks great sat in my living room on full show.
Read more..

10.10.2019

Overall a very nice case. Well built and sturdy due to the steel construction and actual tempered glass. The option at the back of the case to mount your GPU horizontally was actually very useful for getting into that area when installing my GPU, wireless and sound cards and there is plenty of space at the top and bottom of the Motherboard to route cables through, something i've always struggled with.The built in fan hub in the back is also a very nice touch and ended up the only fan me actually installing via the Motherboard being the CPU fan (i'm using an AIO). It also has the front panel connectors in a single input as well which was very nice as i've always struggled with them in the past.There aren't many bad points but the biggest i found was the screws.Throughout the tower, the screws were either on far too tight meaning i almost threaded several just trying to put my cards on and the thumbscrews for the front and back panels feel really cheap and don't seem to fit quite right meaning they can be very difficult to take off and put back on. I ended up actually using a different screw for one of the back slots as the one they provided simply didn't fit.One last thing i would ask, they have obviously made an effort with cable management and there are some very nice ideas but perhaps putting a space at the back for the slightly bulkier wires would be an option. I found it quite tricky with the Motherboard 12 pin and the other bulkier cables to get them into a place where i could close the backplate without too much pressure being on it.Other than that though i would recommend this case. It managed to fit my Sapphire Vega 64 which is a huge card with a little bit to spare (that's with a push/pull radiator setup at the front) and the RGB element was effortless. Worked straight out the box with no issues at all. Though i'm quite boring and went with a nice pale teal colour to mix well with my white LED fans.Overall, a good solid case for the price but some easy steps they could improve on.
Read more..

27.1.2020

Why did I buy it? I wanted a good looking case to show off my new hardware, and this thing looks stunning. Front fans are lit and colour can be customised using NZXTs software. Installation of components was easy - be careful you use the correct screws for securing the motherboard though, there's quite a selection so check the instructions if you're not sure. Don't quite understand how the alternative gfx card mounting works without some sort of PCI-E cable (are they a thing?) And even then, doesn't look like there's enough clearance for effective soiling with the windows on the case.Cabling for built in lighting is all ready to go, just connect it to the motherboard as per instructions and it's ready to go.This thing is stunning, and the layout is novel, hiding the PSU and disks out of the way, glass front and side to show of any RGB or fancy hardware, but...Why didn't I give it 5*s? Opening the case on arrival should have been easier, the instructions are clear on how to do this, but they arrive inside the case. A couple of the screw hols didn't line up perfectly, mounted everything fine but I don't expect that on a case half the price. Cable routing and management is good, but it's not perfect and I had to make a couple of compromises, especially when connecting the CPU fan to the board. USB A socket at the front is ever so slightly misaligned, almost slightly rotated inside the case, meaning a bit of force is required to insert a device. This does however give a nice secure fit so it shouldn't develop any play leading to connection issues over the years as some of my cases have.Is this case worth the price? There's really not much else like it, it's spacious and cable management may work out better for you than it did for me, maybe the misalignment issues were limited to a small batch, but I expected better. If this case is the one you want, then it's worth the price, if you can live with something (overall) similar for less, I'd consider looking at that instead.
Read more..

12.10.2018

Absolutely love this case. This was my first PC build from scratch and it's a great case for new starters who want to put together their own rig. Very clean aesthetic. The internal cable management is pretty good, although I did have to fight a little with the 'cover' piece that runs to the right of the mobo, as it made it a little difficult to plug in the front USB 3.0 ports and my SATA cable, but that could also be an unfortunate symptom of my mobo's port placement!Something to be aware is the case is designed in stock config to work on 'negative pressure' for airflow - meaning the two fans it comes with are both blowing outward, meaning the case is effectively 'sucking'in air around it through any and all openings. Thankfully NZXT have included airflow filters over all the designed vents to mitigate any possible dust build-up, but it'll end up in there eventually. Also, if you're worried about thermal performance from this, it's actually surprisingly very good despite being negative pressure based. My GPU never gets higher than 45C on heavy sustained load, which is very impressive!One caveat that might bother some (but not me!) is there's NO front drive mounts. So no CD/DVD/BR drives. Instead there's a mount for two fans which you could use for intake if you want to change the airflow to positive pressure. Another tiny complaint, but not enough to deduct a star, is that the screws around the PCIe slots at the back are REALLY tight - and you might find some paint flakes off. If you're concerned about this interfering with the motherboard, I highly recommend you figure out which slots you need to remove the covers from and do so BEFORE mounting your motherboard, as it might get a tiny bit messy.
Read more..

11.1.2019

This is possibly the greatest case that I've had the pleasure of building inside. The size of this case and the plethora of cable management options is beautiful, the case includes cable runways and Velcro straps to keep the cables tidy and neat. The inclusion of removable SSD trays that can be placed where holes are located is excellent, they can be placed visable at the front under the GPU or hidden round the back of the motherboard. The metal shroud to the right to allow cables from the back round the side is excellent, there is plenty space for cable extensions as well as the small cables from the front IO and case fans.The case itself mainly features metal and plastic,the plastic is of high quality and very durable. The case itself has some weight to it so be assure that its quality is top tier. The tempered glass brings a lovely dynamic and allows you to show off the internals of your build. The PSU shroud helps hide the power-supply cables and hard drive bays.During building, every area is accessible by removing side panels and thumbscrews, allowing for easy building and cable management.When the case arrived, it was well packaged and honestly it was bigger than i expected which was a pleasant surprise, this was my first case that could hold ATX and above, i was more used to mATX. The standoffs are well placed making installation of the motherboard easy. Accessories are kept in a small NZXT branded cardboard box and contains various cables for the motherboard and all the necessary screws.This case could easily support customer water cooling loops and AIOs with radiators, the case has a removable bracket at the front of the case for radiator installation.
Read more..

24.5.2020

I'm really pleased with this case. It looks great, is quiet and was very easy (even with my crappy stock PSU cables) to build very tidily!There any many clever little innovations like the channels with Velcro straps for cable routing, little plastic clips for SSDs, etc.The only negatives are:Manual is like Ikea instructions, pictures only. Fine if you know what you're doing.The caddy for conventional Hard disks requires removal to install drives which requires the case to be on its side to remove. Also, there is zero clearance so the bottom slot is useless for most power connectors. The same is true if you attach a drive directly to the bottom of the case, no clearance so impossible.Luckily I only had 1 to install so I moved it higher, bit this seems like an unnecessary failure. If I was NZXT I would have the caddy take little plastic mounts that can be screwed to the side of the disks, then drives can be added/removed without removing the whole thing.There is no way to route cables from the radiator tray on top without going round the ends of the radiator. In my case the fans in a pull configuration were too short to reach the fan header because of this, i had to use an extender. Given how good cable routing is in general, it would have been nice to see a way to route the cables from the radiator tray straight down into the back of the case.Otherwise it's fantastic. Looks amazing, quite and I've had no problems with cooling (initially i was worried about this because of the solid front/top of the case).Kinda wish I'd got the 710i for the eye-candy, but I know that after 2 weeks I wont care about flashy lights so in the long-term, the right decisions!
Read more..

5.1.2020

Literally the best case I have ever had the privilege of building in. The amount of ease I had with this case is actually insane, plugging in the cables and dealing with cable management was very easy thanks to the included straps, helpful plastic panels and the nicely placed and Infamous nzxt hole, making installing the 24pin and other cables (SATA USB 3.0 etc) easy. There is convenient hole at the top and bottom of the case to make it simple to plug in the CPU 8 pin and the other bottom cables (FPC USB2.0 etc). The front panel connectors were also easier to connect than ever before as this case had only 1 connector for the entire FPC, making it so simple,other cases NEED to have this now as theres no need for front panel connectors to be so awkward.The hard drive and ssd bays were also at the back of the case, keeping the build clean and concealing any cables that would originally be shown. Ssd's can be helpfully installed in little plastic bays that can be moved to where is easiest in the back or even front of the case if wanted. The case helps to make the build cleaner by having a power supply shroud extending through the bottom of the case. Installing case fans is also very simple and satisfying, having a removable panel at the front for 2 extra fans if needed, as 2 nzxt fans are included you are fine with not putting in extra fans anyway. The structure of the case is amazing and not what I expected, the side panel was very easy to keep the cables in and the tempered glass is great for showing off the components within the case, overall a great case I would recommend anyone who is looking for a mid size tower with easy and satisfying building.
Read more..

20.12.2018

Overall amazing case for the price, comes with 2 fans, good airflow, cable management made bit easier with multiple holders for zips/ties.The case could be better however, had slight issues with cable management, the stock power cables are thick which makes them hard bend and on most motherboards the connections will be at the edges, so I expected bit more space at the top of the case to run thicker cables, the metal stripe in the case could also be bit close to the glass leaving bigger gap behind for running cables as most of the connections are at the bottom for most MBs so the biggest clutter of cables is run where the gap is thinner and almost no cables run at the wider gap area.Also thesplitter thing for cable management could be less closed off to sides making it easier for cables to split at different heights. Just my opinion, havent build many PCs so it is based on my experience of someone who is new to PC building. Also make sure to tighten the standoffs, one of the 8 in my case was slightly loose thus had to remove MB a couple of times (can also be blamed on my inexperience, hoping that new screws and screw holes would fit better, while it is the opposite as some metal bits are still stuck once in a while, so better loosen the holes a bit before actually doing the installing and make sure you use correct screws.)
Read more..

19.10.2019

I was initially concerned with air inflow but an honest review convinced me to give it a try. As the review said, you do not necessarily require the front case fans if you are not using a liquid cooler with a radiator, you just have to get an appropriate fan cooler. Yes, I can attest to that. I don't have extra fans at the front but I have two Noctua fans, one 120mm at the back and one 14mm at the top.The CPU and GPU get adequate colling when my PC is running with overclocked settings that set the i7 9000K CPU at 5.2 GHz. The CPU is cooled using the Noctua NH-D15 Premium CPU Cooler which draws in air from the front of the case.I would recommend this case anytime because of its beautiful andsimplistic design and due to the fact that it allows adequate air inflow and outflow on my system.But be aware that, if you are going for the Noctua NH-D15 cooler, you will need an extra 120mm Fan (get Noctua if you can). I mentioned this before in my review of the Noctua cooler. You will need it because the outer 14mm fan is too high. Due to the position of the RAM slots, the fan would be slightly displaced resulting in about 3mm or more protrusion towards the tempered glass slide door/window so you might not be able to close it.
Read more..

13.7.2020

Here is a list of pros and cons that I found when building this PC:Pros:Well packagedLooks clean and well builtLots of room for different cooling options.Easily removable tempered glass panelOne button to remove back panelCable management is easy with the built in cable routing.Cable management bar does a good job covering the cables up - can be removed or moved over slightly.Comes with 4 good quality fans and a fan splitterGood front panel i/oAirflow is greatCons:Cable management bar was obtrusive - had to bend 24pin and front panel USB 3.1 cable at a tight angle even when I moved it over - this shouldn't be a problem if you use a Micro-ATX motherboard and it may not be an issue with otherATX motherboards.The front and top panel can be difficult to remove and require a good amount of force - depending on how often you will remove these panels, the likelihood of the plastic clips breaking is low.In conclusion this is an good-looking case with a strong build quality to match it's price. I intended to buy the Cooler Master 500p mesh for its great air flow but I went with this case instead because it offers good airflow and for me personally I like the aesthetics of it.
Read more..

8.1.2020

Having just built a new video editing machine for use with Premiere Pro, I used the H510 Elite case in Black as I preferred the aesthetics and internal design. When I came to building the machine, assembly was easy, the RGB fans are silent, and the ability to chain multiple extra fans/lights together is brilliant! There are two 3.5" storage bays and two 2.5" SSD bays available to you. The power supply is well hidden, yet has plenty of airflow and respective power and accessory cables are well out of the way using some fantastic build into the case cable management. Now the machine is completed, it runs silently and the ability to turn the lights off via HUE2 are great!I'm also very fond of the preset colours available and would recommend this case for the RGB lighting alone. I've watercooled the i9 CPU with NZXT's Kraken cooler, it fits perfectly on the front of the case behind the two intake fans. This case also has enough room for beefy GPUs.Overall really like the case and this build! - Jake
Read more..

29.7.2018

This case is an acknowledgement that optical disc drives are less popular these days - and NZXT has done it in style. Found this bad boy after just searching 'NZXT' as I knew they were good for cases, didn't read much and just bought the thing.Looks nice and sleek. Doesn't look like those common H.R. Giger looking cases.Has room for 3 SSDs and 3 HDDs, Though I doubt I'd ever use them all, it's nice to know that the option is there if I ever need it. The two fans included were a pleasant addition to the two fans I already have as well. Plenty of room inside for air to flow through and some good thought was put into cable management.My only criticism is that when opening the glass panel for the first time,the force I needed to wedge out the top right corner made me think I was going to shatter the thing. Yes, I actually read the manual on how to open it, so I know I didn't get that part wrong. I hope.
Read more..

18.6.2020

It is nice design well built let down by cheap USB connector which got stuck in Mobo. Had to return first case. This one got better cable but screws been over tighten and grab screws falling out of holes. Jeez can’t get perfect allAnyway it’s not all negative. Everything else is positive, case is smart with plenty of space to hide the cables. I managed to fit in there msi b450i with 3700x with noctua d15 heatsink. To do that you need to remove fans included and install 15mm versions, motherboard without heatsink first and plug all the cables at the top, then rear fan, then heatsink followed by mod fan(very little space to put fingers there. Then plug all connector on right side,install second heatsink fan and then another 15mm top fan. It’s pretty much no gap installation. Used all noctua fans, CPU idle is 38 degrees and doesn’t go over 66.
Read more..

7.10.2019

This case looks amazing and has a real nice finish to it. Lots of room for cable management though the 1 Velcro strap is pretty weak and with there not being many places to mount tie wraps, let’s cable management down at the rear. But the case makes up for this in other areas and was a joy to build in but I would not recommend using a non modular PSU. The added front I/O type-c is a really nice touch though not a lot of ITX boards have the required header, I have found a workaround to this though but this is not NZXT’s fault they are pretty much future proofing this case. Taking the tempered glass side panel off can be a struggle as it takes a lot of force and makes you feel like you’ll break something but I would still recommend,I’m really happy with this purchase.
Read more..

17.7.2020

Well just built my first PC since 2002. Nice case to build in. Read a few reviews and youtube videos about NZXT and there love of over tightening screws. Yeah that is true. Apart from that it is well built and suited my budget and the asthetics that I was going for.Would recommend. Oh airflow. Right.AMD 3600 with stock cooler and using AMD master for a auto overclock.Zotac GTX 1660 super OC'd with MSI afterburner 105% power max temp set to 85c core 115% MC +850 fan auto.Using a MSI B550m morter, be quiet SP 9 600w.Results in a max cpu during 3d mark time spy of 92cGpu 85c and a score of 6520 (graphics 6437 cpu 7038)That was with the stock negative pressure set up with no intake and 2 exhaust(back and top)Idle temps Cpu 37c gpu 32c room temp 23c
Read more..

List All Products

Terms and ConditionsPrivacy Policy