logo

Info


Reviewbucket.co.uk scanned the internet for NZXT CB-LED10-BU blue LED-Kit 1m reviews.
You can find all NZXT CB-LED10-BU blue LED-Kit 1m reviews and ratings on this page.

Read the reviews.

Analysis


For NZXT CB-LED10-BU blue LED-Kit 1m, 283 customer reviews collected from 2 e-commerce sites, and the average score is 4.2.

Detailed seller stats;
Amazon has 282 customer reviews and the average score is 4.2. Go to this seller.
Ebay has 1 customer reviews and the average score is 5. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

4.1.2012

Recieved, in very professional packaging. High quality- the cable is sleeved well and no damage. For those new to the building that are worried about touching the board- put the antistat band away. The board isn't sensitive equipment, just a power circuit.Installation is notably easy. NZXT provides clips you can use to route the cable anywhere you want throughout the case. These clips can be fiddly to work with, but with practice you can fit them anywhere.The main board/powerswitch fits in the standard I/O back port (where the graphics card/wireless antenna links to the outer case) and is controlled from that port on the outside. My advice is to put it anywhere that won't be used anytime soon,but still allows you to both route the power cable tidily and reach the power button. I put mine on the very bottom port. This allowed me to keep the case tidy, but it's a pain whenever I want to turn the lights off!Once installed and routed, you can turn it on and revel in the huge amounts of light it gives off. This thing is BRIGHT- on full power it makes my machine look like some kind of flux capacitor. Routed right (with the LEDs facing the right way), you could probably put it underneath the motherboard, around the drive bay, wherever you want, and it'd make the case look great.In conclusion, a must-buy, especially at this price.
Read more..

15.7.2016

This is THE best LED light strip that I have ever used!It fits nicely in an expansion card slot on the case which allows you to reach the power button and the dimmer setting switch. It doesn't connect to the motherboard at all, so is easily position in a way that keeps your system looking nice :)It is powered internally by connection to a standard molex connector from the psu which is an extra little sleeved cable easily hid away for cable management.The sleeved LED Cable itself is 1metre long, which will fit around most window displays on the side of cases, the pack comes with little hooked stickers for easy placement,it took me approximately 2 minutes 23 seconds to fit it around the frame and tuck it in for bed.I can honestly say it looks superb.PRO'SEasy to fit.Looks amazingly good.Has dimmer setting switch which is 3 way to suit.Has a power button.Is of good solid build quality.CONSMakes the system look peachy in such an effortless way that if you have it sitting next to the tv/monitor when trying to watch any movies or TV shows you miss half of it due to the eyes drifting over admiring the GLORIOUS pc lightshow.Would I buy again?In a heart beat.
Read more..

19.1.2012

I'm quite anal about quality and this fits the bill (almost) perfectly.First off the packaging is good - a generic hard plastic packet kept the product safe from any damage in transit. Then the product itself is very nice quality, in the package is the small motherboard built into the blanking plate, the LED strip, a molex cable for power to the 'board and a collection of sticky-back mounting clips to mount the LED strip in your case.All parts are very good quality and the sleeving on the LED strip is very nice and matches perfectly the modular cables supplied with my OCZ PSU. The blanking plate has a 3 way switch for brighter/dimmer and a push button for on/off.The only things I could stretch to moan about is the fact that where the strip is quite stiff,due to it being tightly rolled in the packaging it is hard to get it to lay out during fitting without it being a pain. And also they could do with putting more sticky clips in, they give you 4 big ones and 8 small ones - but they run out quick when going around complex corners.But all in all very happy with this product and will be looking to buy from NZXT again.9.5 out of 10.
Read more..

10.2.2016

Got these to fit into my Corsair spec 03 case.I have two LED fans running (one intake, one exhaust and one additional plain intake) which added a very subtle glow to the visible components.Being reasonably proud of my first build I wanted to be able to stare lovingly at my works through the side window so naturally wanted more illumination.These do that perfectly:Easy to fitHave an on/off button externally on the PCIE plate.There are also three strength settings but the difference between them is subtle.The cable is easy to work around your case. With 2m there was enough for me to work it around my window and then do a loop around the top of the case.More than enough adhesive clips provided.Colourmatched my corsair red LED fans.Only suggested improvement would be to position the first LED further from the base unit as LEDs look best when not seen directly and I didn't find it easy to hide the first one from view.Will definitely consider NZXT when it comes to adding more components.Oh and if you're wondering if you are too old for unnecessary LEDs... I got some for my dad's retirement PC too- he loves them
Read more..

26.2.2015

I found this to be a great fun addition to the PC. 2 meters is long enough to cover most of the internals and the amount of lights was just fine. They are also quite bright.The kit contains a bunch of little adhesive plastic clips, I had plenty to spare even after finishing the installation of the lights.The power cord is fairly short, but it was long enough to reach to the main gromit where the bulk of the PSU wires ducked into and i was able to neatly connect it to a molex on the other side of the gromit.Some people have complained about the brightness, well I think the white ones are very bright,I can't speak for other colours though.It should be noted that if you install them carelessly and have lights pointing into the surface they are adhered to then they will produce much less light. So if you are struggling to get them bright enough, make sure they are actually pointing at the things you want to light up.
Read more..

16.3.2015

After trying to find a SATA powered lighting solution I was frustrated when only molex solutions were available, however this worked fine simply by using a cheap adaptor in order to link it to a modern PSU. The LED string is more than long enough to go around the a standard ATX case and fairy easy to put in place with sticky clips that come with the unit. The lights are a good solid red and perfectly match the LED fans I have in the front of my case.This would be five stars if it was not for the fact that the power cable is ridiculously short. I would imagine most people would want to link it to spare outlet on the power cable for their drive(s) but it is a little short to stretch all the way over to a drive cage or (in my case)around the mobo to back mounted drives. In my case it worked out because it just about reaches but could be a problem for others.
Read more..

17.1.2015

Recently ordered this on a whim since it was cheap and I had toyed with the idea for a couple of months. Installation was simple, build quality seems robust. The lights aren't overpowering but they do really make my build look good. On/Off switch for if you want to stop being distracted by your beautifully lit up components. 3 settings for brightness which is useful, although there could be a little more range in the brightness (perhaps there is on different coloured sets). It comes with plenty of sticky pads with clips on for attaching to the edges of your case - I did not use these as my Air 240 seems to hold the cable well enough just through bracing it against the edge of the chassis.If you've got a windowed case I definitely recommend getting one of these,although if it's bigger than mATX you may find the 2m version works a little better.
Read more..

19.8.2014

Fantastic product, I purchased two 1Mtr Cables in red to go at the top and bottom of an open frame PC, literally took 5 minutes to fit. Just plug the supplied cable into a spare 4 pin molex connector, fit the circuit board into a spare PCI slot in your case and you are in business. Three settings for variable light intensity allow you to dim it down a bit if required, well sleeved to hide all wires, looks greatCons:- The only slight niggle is that the LED's are attached to the side of a flat cable within the shielding, once you slot the cable into the little plastic clips provided it does not allow for easy rotation of the cable. So it can be a bit fiddly trying to get the LED's pointing at whatever you want to highlight within the case (but it is only a minor observation ) and can be overcome with some fiddling.
Read more..

7.4.2016

Pretty good product, I like the way it has an on and off button and different brightness settings. They are very bright indeed and light up the case equally and very well. Recommended purchase if you want to make your case shine. The only problem is the pcie bracket that needs to go in But the wire connects to it making it look a little untidy or on some motherboards it doesn't even fit. But there are only 2 screws holding it on so you can remove those and put it behind the motherboard tray, this way it doesn't look untidy and doesn't interfere with your motherboard. However, the downside to this is that you can't control the brightness or switch it on or off without removing the backside panel on your case.It is a very good and recommended product apart from the little niggle i have mentioned above
Read more..

19.1.2013

the lights are bright and look cool, but i was expecting it to go all the way around my Coolermaster Storm Scout edges (around the window edges) but it only gets from the PCI-E slot around the left side of my Watercooling radiator then accross the top and back down the right side of the Graphics card, which i think wasn't ideal... but it still looks good the way iv'e done it, just not as good as i was expecting.The 4/5 was basically for the length of the Sleeve, but it was my own fault really for not measuring around the case to see if i needed the 2 metres... if you found this helpful then your welcome. iv'e still yet to see what it looks like in the dark.If I were to buy this again I would definitely go for the 2 metres,and possibly blue because it is brighter.
Read more..

23.9.2015

I had a spare PCI slot bracket and a large vent on one side of my Mini-ITX case, so I thought 'Why not?'Turned out looking great, the ability to adjust the brightness and switch the LEDs on/off is the best part about this, many other case LED's are either permanently on or require you to open the case to adjust their settings which can be a hassle, especially if you like watching movies without distractions.Just don't forget that LED's are uni-directional by nature (they function like spotlights), so once you've set them up I'd recommend powering up the system while the case is still open so you can adjust their positions to highlight the components for better effect.

28.1.2013

I brought these lights to go inside of my NZXT Phantom 410 case and they were easy to install and lit up my case like Christmas. I was amazed at how powerful the LEDs were when I first turned them on, and loved the included light adjustment and off function included on the PCI slot. They did take me a while to put into my case, but that is because I am very precise in everything I do in my build, so spent a while adjusting the lights to ensure they were aiming correctly and that they would be completely hidden within my case.If you want to light up your mid-tower case, there is no need for the 2M strip, this 1M strip will easily illuminate up your case.

4.9.2015

Great product for lighting up a PC case. The PCB for the lights fixes onto a PCI slot and then connects to both the light cable, and to a molex power connector. The pack also comes with some sticky holders to fix the LED cable where you want it to go. The brightness of the LEDs is enough to transform the look of my PC, and the IO panel allows for 3 brightness settings via a slide switch, along with a power button. With my PC anyway, the LEDs turn off when the PC does (so they are not lighting the room when it is still plugged in)Of course, only time will tell as to whether or not these will last, but so far I am impressed with them

17.12.2014

So this LED cable is perfect,It even and it doesnt say this but you should know this comes with a packet of little sticky clips that harmlessly apply them self onto practically any surface (including glass) and hold their own weight and the cables weight perfectly.The brightnesses all three of them are quite nice, I choose the lowest as it's nicely calm and the brightest one is well a super nova.I have a picture of an machine with it in use for you guys and this is on the brightest setting.This is a HTC DCIM camera so quality is okay :DDo I recommend it? well not anything can really go wrong with it.

5.11.2015

Cable quality is very nice and sticky oads that are included are not the strongest but will do the job. If however they fall off you can just put double sided stick paper or any other alternative.Lights are very bright i have the blue led and are nice and clear.The pci slot has a power switch and a 3 level adjuster on the there for low medium and high for the lighting.Works like a charm and at its brightest it is very bright so i normally keep on the lowest setting.Overall its a very good product for lighting ur pc and good quality for the price you pay.I personally recommend this product to all.

List All Products

Terms and ConditionsPrivacy Policy