logo

Info


Reviewbucket.co.uk scanned the internet for Coollaboratory Liquid Ultra reviews.
You can find all Coollaboratory Liquid Ultra reviews and ratings on this page.

Read the reviews.

Analysis


For Coollaboratory Liquid Ultra, 36 customer reviews collected from 1 e-commerce sites, and the average score is 4.7.

Detailed seller stats;
Ebay has 36 customer reviews and the average score is 4.7. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

17.2.2019

I bought this for a 5 year old gaming laptop (XMG A503 - Clevo W355STQ) because I had tried different thermal paste, among them the prolimatech PK-2, and after 2 or 3 weeks the CPU was reaching 99º C again and throttling due to the temperature. I think the paste didn't last long because of the low pressure of the heat sink. After trying this liquid metal, the temperatures don't reach 75º C... It's quite amazing! But now it's a matter of waiting a few months and see how it performs. Ageing should be much better than with regular thermal paste in any case.The application wasn't as hard as I expected. It comes with two brushes (I only used one) and after 30 seconds one gets the technique just right.You have to make quick and short passes with the brush so it breaks the surface tension of the liquid metal and it creates a thin film on top of the chip (CPU or GPU). If you are too slow or gentle with the brush, then the liquid metal behaves like mercury and it creates "blobs".The only problem with this is that the liquid metal is conductive so you have to be careful not to shot-circuit anything. I didn't use any protection for the circuits around the CPU or GPU because they didn't have any electronic elements too close (just some green board) but in any case you can use a bit of mask tape around to cover them if you feel more comfortable that way.Read full review...
Read more..

4.5.2017

This stuff can be hard to apply correctly. I personally think it's best to apply it with paper and smear it on both surfaces then use a second piece of paper and use the edge like a blade to remove any excess.This information isn't available anywhere but i works so much better that way. If i ever do it again I'll make a YouTube video.P.s i recommend thick gloss paper and the paper used in the packaging is perfect if not use the front cover of a magazine.If you try and use the brush that comes with the kit you'll just have blobs that are uneven and to thick and it won't work as well.This paste out performs every thing I've ever used and gave me a 5c cooler CPU with the same cooler.

5.2.2017

Coollaboratory Liquid Ultra Thermal Compound is amazing! So good infact that I bought another kit!1x kit was enough to delid my 4790K + between IHS & Cooler + 2x 980Ti GPUs with approximately 1x CPU spare for next time.4790K temps over Christmas with hard gaming was cooking my CPU to 100c @4.2GHZWith CLU I'm getting around 45-60c Load and 30c Idle for CPU and from 90c to 75c for the top 980Ti GPU, 65c/70c bottom GPU, I could never achieve this with ThermalGrizzly or MX4. Perfectly easy to apply too which being LIQUID METAL must be SPREAD not just a pea size and whack the cooler on top!

7.7.2016

I had delided my 4790k and overclocked it to 4.6 @1.3volts. Temperatures were hitting the 80's with IC Diamond. After applying Liquid Ultra, my temperatures dropped from the low 80's to high 50's. Do not waste your money on anything else. Use this directly on the die and IHS. Between your IHS and cooler, use whatever else you like. I used it on my XFX R9 390 as well, and it dropped my temps from the low 80's to low 70's at load with stock cooler. Again, great stuff if not the best!

26.3.2017

I have a cryorig A40 liquid cooler and before I delidded things where super hot! At 5Ghz i WAS maxing out at the 99-100c thermal limit at any frequency higher than 4.8.I am now maxing out at 80 at 5Ghz on intel burn test! My room is about 73-75 degrees. Core voltage is at v1.310. My fans don't even hardly spool up now. Couldn't be happier thank you!

8.2.2018

I liked to watch The Invisible Man series when I was younger, I always wanted to have his power, and now when I'm older I can finally fulfill my fantasy. I smeared this amalgam all over and started touching myself inappropriately. I finished like it was my first time. Would recommend.

25.1.2018

Got from 50C to 35C idle on my Core 2 Quad Q9540.Willing to overclock now and see the results, but great so far.Have to be careful with the application though, best to take cpu out and apply it outside the case, then put it back.

31.7.2016

Probably the best out there, as its metallic.However, one must understand its also electrically conductive and extremely finicky to deal with.Would still go for it, as no other thermal paste would deliver like this one.

14.2.2019

I delidded my 4790k and this brought the stress temps down from 65 degrees to a cool 40...If you can successfully apply the stuff without shorting your processor then the rewards are waiting for you on the other side.

12.4.2017

Its more fiddly than putting a blob in the middle, but if your overclocking there really isn't an argument, You need to cool that cpu, and this does it. Kits good, everything you need is there.

13.7.2017

Delidded my i7-7700K and used Coollaboratory Liquid Ultra instead of the original TIM and I got great result: 5.1 Ghz on 1.36V and temps 65-75°C.This kit is perfect, highly recommend it!!!

22.3.2017

You will have better temps using this product but its harder to apply and harder again to remove. Also, it electrically conductive so you do have to be careful.

24.10.2018

On average 8 degree improvement when compared to mx4 on my Helios 300 , comes with 2 brushes and an alcohol pad.

15.9.2017

-25C only from this paste, this is crazy really!!! i will never use another cooling liquid anymore.

23.5.2018

Delidded my i5-3570k and replaced with liquid ultra. Dropped the core temperatures by 20c.

List All Products

Terms and ConditionsPrivacy Policy