3M Spray Mount Spray Adhesive 400 ml - Reviews
(4.5)
235 reviews
Info
Reviewbucket.co.uk scanned the internet for 3M Spray Mount Spray Adhesive 400 ml reviews.
You can find all 3M Spray Mount Spray Adhesive 400 ml reviews and ratings on this page.
Analysis
For 3M Spray Mount Spray Adhesive 400 ml, 235 customer reviews collected from 1 e-commerce sites, and the average score is 4.5.
Detailed seller stats;
Amazon has 235 customer reviews and the average score is 4.5. Go to this seller.
Detail
Similar Items
12.12.2018
I do a lot of different crafts and have tried many different spray adhesives but I think this one is the best one yet. The glue dries transparent and you can reposition if you are quick about it. Once it sets then it has a good adhesion. It’s got a decent nozzle so it doesn’t spray too wide so you don’t get glue on areas you don’t want it. I’ve used it on card, paper, felt and ribbon and glitter and it’s done a great job.I’m very pleased with this product and I’ve used it a lot in the run up to Xmas when crafting is the order of the day.
3.3.2011
Needing a spraymount both as an adhesive and as a tack spray - for spray paint stenciling. I was delighted to find that SprayMount Spray delivers. The initial spray is a good amount of tack, not enough to rip the paper or a fragile stencil (as I have found with other brands), but strong enough to bond two peices and still allow repositioning. As an adhesive I have found it offers a good bond that is only removed by tearing the image off. A good all-round product, which is why i'm going back for more.
18.5.2015
Great product!! great price!!! I was searching for this glue for my sketchbook projects where I had to glue paper/fabric/plastic..all sort of materials. and this is just brilliant. so neat finish..! simple to apply... note: need a lot of paper underneath to protect the spray going on your floors,carpets, strong smell. But result is brilliant.Even if you stick pages, and later decide to remove and change for another page - simply can remove it and re-aply.But for 6GBP cant go wrong!!! 400 ml!!
21.9.2020
There are 5 main features of this glue:-1) For applying ebay postage labels the printed side will not be affected (unlike evostick) - the ink wont run2) For sticking a head lining to the roof of a car, the glue has a longer set time allowing the repositioning of the cloth3) Unlike rubber based glues the adhesive lasts a very long time - it won't fall off after a couple of years4) Its colourless5) When sprayed on it forms a nice even layer (other ones I tried come out like spiders webs)
31.1.2014
This is good stuff. I use it to stick little receipts onto sheets of A4 paper so I can file them away properly. The receipts stick down well, are re-positionable if need be, and stay stuck down for many years. I've been using it for the past 20 years at least and I'm not aware of anything coming unstuck yet (although I probably only keep the receipts for ten years or so in fact.) It's excellent stuff but I'm dropping a star simply because of the cost. It is a bit pricey.
14.6.2018
We do quite a lot of framing for my son's Photographic Business, but we were finding that the mount board was sometimes not adhering to the prints for long (especially when customers put prints above radiators) so we tried 3M spray mount onto the sticky boards... Problem solved, no more return prints, the product is pricy but works well for us & the application we use it for - a word of warning, read what it says on the instructions for the ultimate results.
11.10.2013
I use this to stick patterns to wood before cutting out with a scroll saw. The adhesive has a lubricating property which is useful but can be a little difficult to remove from the wood. Of course this spray is designed to mount photographs etc. so I am using it for a job it was never intended to do. I find that 160 gpm copier card is easier to remove than regular 80 gpm paper and the saw blade does not tend to lift the edges of the heavier grade card.
20.1.2014
I make my own greetings cards and use it to stick the photo (which I've printed on acetate film) on to the card. The adhesive doesn't show at all through the acetate film, and you can reposition the print if not quite in the right place. When I spray I put the photo to be sprayed in a deep cardboard box so the spray doesn't escape as it's difficult to get off if it strays to where you don't want it. Very sticky. Invaluable to me for my hobby.
13.7.2012
This product is fantastic, used it to put up 250 pieces of artwork for a children's competition. It is cheaper and faster than the alternative methods as they are so time consuming;easy to use plus you can reposition the work if you make a mistake also it does not leave any marks when you are removing your artwork. This is a wonderful find I will be using this product again, and would not hesitate to recommend it. Did my job prefectly.
7.6.2010
I use Spray Mount when I faciitate meetings and workshops in my consultancy business. Sprayed lightly onto large A0 brown paper sheets and using large heavyweight paper cards, it beats little Post-it stickies every time for brainstrorming, action plans and prioritisation charts. Can reposition cards up to 4 days later and they seldom come off accidently. A great product!!!
17.10.2012
I have used 3M Spray Mount to prepare photographic competition print entries for many years. It is a very efficient and reliable medium. My mounts are plain board for A3 prints. There is no leakage and prints cling to the surface securely. I spray about 150mls from the surface and leave a few minutes for the print to get 'tacky'.It gives a very neat, professional finish.
13.12.2011
I have just finished an A1 sized photo collage with my daughter using this adhesive. It has been very easy to use. It allowed my daughter to change her mind as to where she wanted to place photos and the excess adhesive dried clear and was easily rubbed off the following day without damaging the photos. I would definitely recommend this product.
11.11.2017
As usual Spray Mount is an exceptional product. In the past I've only had one problem and a company in Canada emailed to suggest I use acetone to unblock the nozzle because one of my cans ceased to work. Instead of acetone, because we are unable to purchase it anymore in the U.K. I used nail polish remover and it worked fine. Thank goodness!
24.10.2014
The lid was cracked when i opened it, so now doesn't stay on, however the glue itself is great.Be warned though, it goes everywhere. be sure to use a cover underneath whatever it is you are a spraying.When spraying on thin paper, it can make the paper shrivel or be easily saturated so test mounting on another surface is recommended.
26.11.2015
It sticks stuff like paper and card beautifully. You don't need much. Spray at least 12 inches from your item to avoid saturating the surface and you're done.Just make sure you wear a protective mask. And spray within a box or ventilated booth. This stuff is powerful and gets to the back of your throat.Not nice.