logo

Info

Reviewbucket.co.uk scanned the internet for Asus ROG Strix X570-F Gaming reviews.
You can find all Asus ROG Strix X570-F Gaming reviews and ratings on this page.

Read the reviews.

Analysis

For Asus ROG Strix X570-F Gaming, 130 customer reviews collected from 1 e-commerce sites, and the average score is 4.3.

Detailed seller stats;
Amazon has 130 customer reviews and the average score is 4.3. Go to this seller.

Detail

Click to list all products in this category.

Similar Items

8.5.2020

I was basing my new build around the Ryzen 5 3600X, and this board is the perfect companion.The ATX format is now so well established I'd be surprised if anyone is in doubt about what it means, but just to make sure - as long as you are pairing this with a modern PSU you cannot really go wrong. There are one or two quirks to do with powering your graphics card, and the number of power connectors pins needed for the CPU, but a moment's research will get you all the info you need.So, from that point of view my build using this board was pretty straightforward.The only issues I had were probably to do with the ATX format itself, or may have been a slight mismatch with my case.The front panel power and LED connectors were not laid out in a helpful manner,with some pins labelled "ground" and some labelled "positive" and "negative" (this information was obtained from the very helpful manual). Other boards are more considerate in this regard, but I wonder why these connections cannot be gathered into a single connector like everything else on the board.Also, the I/O cover did not sit in place correctly until the board was in place and then it clicked into place with a little fiddling. This might well have been a problem with the case, but it worked out OK in the end.One helpful feature that I didn't know I'd need (until I did!) was the inclusion of 4 tiny diagnostic LEDs which allow for trouble shooting. They light up in sequence during POST, and if one of them remains lit it can help you figure out why the PC isn't booting. In my case I had mistakenly followed the advice a famous YouTuber and altered the RAM speed in the BIOS, without activating he correct profile. This led to a RAM error, which the little yellow LED was able to indicate for me. I was then able to reset the BIOS by shorting two tiny pins on the board, and the day was saved!The BIOS was very user friendly, and even had an automated setting for the RAM speed, which I had previously ignored. My SSD drive showed up right away, along with the CPU and RAM.Windows installed quickly and booted first time no problem.The only remaining thing to do was download the latest AMD Ryzen chipset drivers, which installed with no issues.There are some decorative LEDs on this board, which I wasn't expecting. They glow through a rainbow sequence and seem to be of no practical use. But if you are planning a colour scheme you might want to investigate how these can be controlled. I have no idea!I've only been running this board for a week, but it seems pretty sturdy, pretty user friendly, and at the price (£200) it seems to represent good value for money.
Read more..

18.11.2018

PROS:- Designed with HQ Rock Solid Components To Give Rock Solid Overclocks ( Even for Amateurs )- 12 USB Ports in the rear & 4 in the Front - 1 USB-C port in the rear & onboard USB-C port for the front panel !!!- 2 Onboard M.2 slots with Direct to CPU connection & 4 by 4 Bandwith- A Ridiculous Amount of Onboard Connectivity for Fans - RGB Strips - Water Pumps etc etc- Onboard Switches to Power On, Reset, Safe Boot, Switch Bios 1&2, Slow Boot to help Hard Core Overclocking etc- Very Heavy- Solid, Attractive, Powerful, BIOS Design- High Quality Onboard MOSFETS used for delivering Clean & Precise electricity when needed- Shockingly High Quality Onboard Sound with Gold Plated Japanese Nichicon Capacitors = Punchy Bass,Clear Highs & Mids ... almost as good as my Creative Z Soundcard i'm using ... but a discreet card is still king lol- Runs a 3950x without breaking a sweat ( No need for Noisy Onboard x570 Motherboard Chipset Fans )- The Ability to update the Bios with a Usb Thumb Drive even without a CPU installed !!!- Onboard Addressable RGB LEDs Controlled by Your Bios or Aura Sync Software !!!- Has way more onboard options & ports you'll ever need ... because more is always better lolCONS:- NonePc Build Parts ListAMD RYZEN 9 3950X32GB GSkill Trident Z RGB CL16 Ram x 2x16GB SticksASUS Crosshair Hero 7 ROG MotherboardCorsair H150i 360 Liquid CoolerEVGA GEFORCE RTX 2080ti FTW3 Ultra 11GB Nvidia Graphics CardCreative Sound Blaster Z HQ PCI-E Sound Card3x LG IPS LED Monitors for video production & gaming500GB Samsung NVME PCIe M.2 - Boot Drive500GB Samsung SATA - Video Editing Cache Drive10TB Toshiba SATA N300 NAS - Storage DriveCorsair RM850x 80 PLUS Gold 850 Watts Power Supply Unit with Intelligent Fan ControlFractal Design Define R6 Tempered Glass E-ATX PC CaseI bought this Motherboard for its Quality Build & Solid Reputation with the record breaking Overclockers that use the ASUS Motherboards the most in Competitions.It also has the highest amount of rear usb ports !!!I recommend this motherboard & think its worth every penny :)Hope This Review Helps :)
Read more..

18.6.2020

Overall a good board, but I encountered a couple of minor setbacks with my build. The first unseen (by me anyway) is the issue of USB 2 headers; I needed 2, and the blurb on the website etc doesn't really mention the ROG Expansion isn't a normal USB2 header. My build required 2 items to connect to internal USB 2 headers (Corsair H100i RGB PRO XT cooler and the Lighting Node Pro supplied with the ICue 465X RGB case). It took me a little while to rule out the ROG USB Expansion Header as this is intended to connect to the proprietory USB Expansion Hub which appears to be no longer available. I looked a the pin connections of both the H100i & Lighting Node Pro and estasblished neither could connect to the Expansion header (several pins marked N/C in the manual).The easiest would probably have been an internal USB hub, but the only one with any sort of clear recommendation was the NZXT - which was out of stock with no availability date. In the end I chose the following route: connect the H100i to the internal USB 2 header, purchase an internal USB 3.1 to USB 3.0 convertor to handle the front panel USB connection - WATCH OUT - make sure you get a 3.1 male (to go into the motherboard) to 3.0 female (to accept the front panel connector). Then an internal USB 3.o to USB 2 convertor - again, watch out to make sure you get the right connectors, so I could connect the Lighting Node Pro to the connector and into the USB header.I chose not to use one of the cheap chinese USB 2 hubs, as the reviews weren't stellar - ranging from good, to failing on power-up, to taking out the motherboard port! and with only one header available on an expensive board I chose not to take the risk.Final thought - the board only comes with 1 NVME heat spreader and for some reason that is not on the primary socket, it is attached to the M.2 port that will steal bandwidth from the graphics card:- the lower socket (uncovered) is the one you want to use.
Read more..

4.2.2020

This MB has given me great performance. Over the last few weeks i have completely gone through each bios setting to get the optimum performance without the need to Overclock. The 3900x accompanied by this MB runs everything perfect without one crash or fail. The earlier bios revision which fixed the boosting issue run the boost at the given speed as it should, but new features were added to the latest bios which did slow the processor to 1525Mhz. Running the cpu voltage manual at 1.119v keeps the processor at a steady 33-40 degrees idle and a max of 65-70 under stress boosting. If anyone needs a guide on the bios then let me know in the comments and i will be happy to help.You can leave the bios setting as standard, but this does make the processor run a lot hotter leaving the settings to standard auto. Asus has created and brilliant motherboard and the cost is worth it, but a little knowledge is required to set this MB up to optimum settings. The memory i use is 32GB Corsair CMK16GX4M2B3200C16 Vengeance LPX 16 GB (4 x 8 GB) DDR4 3200 MHz C16 XMP 2.0 High Performance Desktop Memory Kit, Black, which runs great. The watercooling features on the board looks great when added to your existing loop, but don't go out your way to do this unless you already have a watercooled kit as it works fantastic without one running at the stock speeds. Don't overclock unless you really know what your doing as this does require major bios settings to be changed. You can use ryzen master to do the work, but that is not 100 percent and if you get any problems and try to boot into windows 10 at times it can cause a crash at the start logging in. Eventually i will be giving a guide to this motherboard and the bios settings to help anybody who needs it. I hope this helps. Take Care Have Fun
Read more..

9.7.2019

This mother board is just awesome,First it is very very easy to set up your basic system, cpu, ram, graphics card.The tricky bit was finding which slot to put your nvme ssd drive into, for reference use the lower slot next to the chipset heatsnk with ASUS eye logo on it.The RGB is fantastic on this board if you are into that sort of thing, if not you can turn it off within the bios or using aura sync. This board is feature packed and the power delivery from the VRM's to the cpu is massive overkill, so much so, it will have zero issues powering and overclockoingth enew Ryzen 3000 series cpus even the monster 12 core 24 thread 3900X.Building a system with this board is a breeze lots of fan headers 10 in total including cpu fan header,cpu optional header and a All in one liquid cooler header.I cannot recomend this board enough, especially if anyone was thinking of buying this for the new Ryzen 3000 series of cpus (just make sure you update to the latest bios) as it will be much much cheaper than the new X570 motherboards, that are really not necessary, if you purchase a board of this calliber on X470. You dont even need to have a previous gen cpu to update the bios, as this can be done via the Flashback button on the rear I/O.Just buy it, you wont regret it.
Read more..

18.5.2019

So I was on the the market for a new motherboard to go with my new all white RGB build. And let me just say the stock pictures dont do this justice.Of course substance is the main thing with tech but style does make a huge difference as well. Paired up inside my white Corsair carbide 275r case this looks amazing. The lights look great and really do create a nice ambience on my desk and there are so many customisation options with the included software too.But looks arent everything however I'm pleased to say the performance does not disappoint either and this motherboard has the easiest bios I've ever worked with. You can overclock your system with a few clicks with the help of easy mode or tune every little detail possible with the advanced.The software included to control the fans and the lighting is fantastic and is very simple to use.The bottom line is this motherboard is beautiful to look at but also has the features and quality performance which will suit your needs wether you are a gamer or even an enthusiast. The price is a little much for a board but for the extra features and benefits comes the price tag and you do get what you pay for.Would definitely recommend
Read more..

2.1.2020

ASUS X470 PRIME X470-PRO: I bought this to replace an ASRock board that was giving me endless BSOD and system freezing issues. The board was easy to install, the LED system is great looking (and can be easily deactivated in BIOS), the board instantly found all my RAM, and since the replacement of my awful ASRock board I don't get blue screens of death any more. I haven't played with the overclocking and fan control features yet, but the BIOS is very intuitive and extensive, so I'm a very happy customer. Note that the colourful LED lights on board stay on when the board is powered and your PC is off, so if that annoys you then you'll need to switch the LED lights off completely in BIOS.I haven't run a BIOS update yet, as the last set was from mid-2019; and as I wasn't experiencing any functionality issues with my old Ryzen 1600X processor I left it alone. You might need to update BIOS to get it to work with a Ryzen 3-series; I'm not sure. I will be sure to do so myself before upgrading my CPU to a 3-series, which this board supports as far as I can tell from online research.
Read more..

15.5.2020

I put my new build together just before the lockdown and hardware prices shot up.The more expensive "Prime" iteration might suit better if you have very specific audio output requirements, or you've got a clear rig door and want to show off your pretty build. I didn't need these things.I need decent performance. I actually had my eye on 3/4 boards, but after watching and reading a ton of reviews this was clearly miles ahead in quality. The thermals on this thing are supposed to be great and there's no problem running 3900/50 cpu's (I intend to drop something like that into my rig in the future). An alternative board I was interested in was tested with a 3950 and ACTUALLY CAUGHT FIRE.So,this doesn't look super pretty but it's really well engineered. The recent news that the next generation of AMD processors won't work on x470 boards came as a bonus and I felt like I'd dodged a bullet.If you need a good board to last a good few years this is a good buy. Wifi and audio options can be added easily and cheaply. It's a very good buy. Especially at current prices.
Read more..

22.8.2018

*EDI the auto ram oc feature cause my computer to fail post 1/3 times. Since I'm not really tech savy in overclocking my ram I set back ro normal and it works fine. I just need a stable computer for digital rendering anyway.This was used in my first ever build. It's working like a champ no issues as of this moment (knock on wood) the lighting is nice, but as mentioned in previous comments can be blocked depending on what the GPU size is. The two main issues when building my pc was that I had to download the instruction manual online which was way more detailed that the crappy one that came with the box. And secondly removing the plastic was a pain. Be really careful with it to make sure you don't rip prices off.Try to do it as one continuous pull. The parcel arrived on a Wednesday when I ordered it on sat night which I was fine with but I use prime. It should of arrived on Monday as it said it would. Nonetheless mobo is working well and I really do enjoy the DOCP feature which makes the CPU overclock just a lil. (Using Ryzen 2700x)
Read more..

18.8.2018

Overall, the motherboard performs exactly as expected. The onboard sound card it provides is great. I did not need to purchase an amplifier for my headphones. The RGB lighting on the motherboard looks amazing but the bottom right lighting can be blocked depending on the size of your GPU. I had a triple fan 1070ti gigabyte gpu so It obviously blocked mine. The PCIE slot for the GPU is plastic so it isn’t as strong, so I recommend removing the GPU if you’re going to transport it. I’m not entirely sure how well it may hold up thicker cards. Another thing I disliked about the motherboard was the areas I needed to peel off the plastic so that it wouldn’t melt.Some of the parts that you usually don’t touch have to be removed in order to completely remove the plastic coating that protects the I/O part from scratches. Other than this, the motherboard works very well and I would recommend it to anyone looking for a black/white aesthetic for their PC build.
Read more..

26.3.2020

Needed to replace my ageing Intel socket 2011 motherboard as it was incompatible with Windows 10 despite being in great working order! Still the price to pay for technology! Settled on the Asus X570-F Gaming for Value, features and requirements. What a great motherboard. Installed and posted first time. Coupled it with a new, AMD 3700X Processor, Sabrent PCIE 4.0 M.2 1TB HD, Noctua NH-15 Cooler and Nvidia 1660 Super, all for just over £1000 from Amazon. All booted and worked first time from scratch! So far no issues, very pleased. The only issue I had and its a minor one is the amount fan headers, my last motherboard had 6, this only has 2 x dedicated Fan headers other than the usual Pump,CPU etc. But with a Fan splitter, I have managed to reconnect all the fans in my case! Excellent, hopefully it will last as long as the last Asus Motherboard I have just replaced!
Read more..

17.2.2020

I use my Desktop PC primarily for audio sound recording, production and mixing.Nice upgrade from B350 Plus. I was having problems with Processor Security blocking start up and crashing programs - not anymore! This is much smoother and stable. Windows 10 re-installed superfast, it actually took longer to download it onto USB.I have had this for a couple of months now and have zero problems.Looks smart and the lighting is a nice touch.I'm making full use of all the slots and sockets with 2 soundcards, graphics card, the two M.2 memory slots and x3 HDD for storage.Runs a little warmer than the B350 (average temp = CPU 40deg, Mobo 40deg). I like to keep it all as cool as possible,never gets to 50 deg.Easy to install. My only problem was keeping all the cables tidy and hidden.
Read more..

31.3.2020

Purchased to go into my white build and drive my Ryzen 3700X. Looks great in my case and no complaints about peformance. The RGB can now even be controlled by Corsair iCUE software, which is a nice plus. The BIOS is solid although lacks some of the more in-depth 'Extreme' tweaking options you get from the STRIX or ROG ranges. Thankfully there's nothing to gain in overclocking Ryzen 3000 series anyway, but if you are intent on doing so then this might not be the board for you.X570 as a platform is a little expensive and arguably doesn't represent as good value for money as an equally compatible X470 or even B350 motherboard, but if you want the most future-proof and up to date technology it's the price you pay.That, combined with the aesthetics means I'm very happy.
Read more..

8.1.2020

This motherboard has no extras like bios flash back, mem ok, c mos switch ,etc but it does the important basic things right.According to hardware unboxed on youtube this has the best vrm of any board in its price range,stays really cool,i am only using a 3600x but it good too know in the furture if a want to bung a say 3950x it wouldnt be a problem for this board.Bios was well out of date but updated to the latest with no problem,set the ram to the stated speed 3600mhz and tightened the timings with the ryzen dram software all when smoothly.little bit of rgb on the chipset fan which is completly coverd by my graphics card,theres really not much room for overclocking with my 3600x but it doesboost sometimes to 4.4 ghz just left at stock.
Read more..

20.8.2018

In the end i could only get windows 10 spyware edition on my new computer once on i downloaded Linux Mint (Cinnamon) works great just as easy as windows to install. With no win10 keylogging, forced restarts and Forced candycrunch software installs etc. I recommend to buy from (Dispatched from and sold by Amazon). If it says (Sold by CompanyName and Fulfilled by Amazon) Amazon are just doing storage and delivery of product. So it's down to the honesty of the 3rd party company NOT AMAZON for the condition of the product. If your building a pc always do a model search on manufacturer website to check all hardware is supported and it's what you need.Dont blindly buy something that's £300 and get it wrong.
Read more..

List All Products

Terms and ConditionsPrivacy Policy