HyperX Fury 8GB DDR4-3000 CL15 (HX430C15FB3A/8) - Reviews

(4.2)

36 reviews

Info

Reviewbucket.co.uk scanned the internet for HyperX Fury 8GB DDR4-3000 CL15 (HX430C15FB3A/8) reviews.
You can find all HyperX Fury 8GB DDR4-3000 CL15 (HX430C15FB3A/8) reviews and ratings on this page.

Read the reviews.

Analysis

For HyperX Fury 8GB DDR4-3000 CL15 (HX430C15FB3A/8), 36 customer reviews collected from 1 e-commerce sites, and the average score is 4.2.

Detailed seller stats;
Amazon has 36 customer reviews and the average score is 4.2. Go to this seller.

Detail

Click to list all products in this category.

Similar Items

12.8.2020

Great memory kit, a little on the expensive side compared with some other manufacturers, but nothing too crazy, easy to install, easy to activate the XMP profiles.It works on both Intel and AMD configurations, tested on both with no issues. The RGB is fine, not too dim and not too bright, it can be controlled via various software, but I personally don't, as I don't need another program to hijack my resources.All Omen 30L Intel Z490/10th Gen processors owners, here is some very valuable information if you decided to configure your new Omen 30L with only 8GB or ram with the idea to add your own ram kits later and save some money.There are several threads with customers with that exact same issue that I am having,we spent a lot of money on the new 30L and opted out of the very expensive ram that HP is offering with the idea to upgrade by ourselves, after all the Omen is marketed towards enthusiast that are expected to do a lot of upgrades and changes on their own, unfortunately we all found out the hard way that the memory upgrade is almost impossible, unless we buy a very expensive ram from HP directly ($158 for a single 8GB HyperX Fury RGB, excluding shipping and tax!!!), naturally most people would try to find a way to get their own ram in, but the way HP has done it, is only ram modules approved by them and with specific identification numbers are accepted to be recognized by the Omen Command Center in order to get control over the overclocking abilities and RGB lightning control.After spending days with HP support, sales, parts sales, community and testing myself, I found a solution, a very easy one for everyone that wants to throw their own ram kit and activate their Intel XMP profile! Mind you first that HP's Bios is locked and there are no controls over XMP profiles, also you are still not going to be able to control the RGB, which to me is a less of a problem.OK, on to the solution, all you need to do is go ahead and install Intel's own - Extreme Tuning Utility, or also known as Intel XTU, it can be found directly on Intel's website, use your Google skills and it will come up right away. Step by step below:- All you need to do after installing it is to run it- Go to the memory section- If your memory kit supports Intel XMP, you will see the profiles there- Select the proper profile (in my case XMP1 3200mhz, CL16/18/18 for HyperX Fury RGB)- Accept the selection and reboot your computer- After the reboot you will have your memory's XMP profile activated and running at the proper speed.- If you want, you can go ahead and uninstall the Intel XTU, and the profile will still be active and working (fully tested, that's what I did myself)- At the end enjoy your freshly upgraded Omen 30L with the XMP and timings that are intended by the manufacturer for your memory!A few side notes:The ram provided by HP doesn't use XMP, even if you overclock it via HP OCC, it only used JDEC and timings that are not even close to the XMP, for example my 8GB stick is rated at 18/21/21 at 1.2 volts, but after Overlocking with HP OCC, the timings are running at 22/22/22/52 and JDEC profile - all that easily verifiable with CPU-Z.After using the Intel XTU and activating the XMP profile of the new or the old (stock) ram, everything works as intended by Kingston with the proper timings, again verified by CPU-ZThat is it, I hope that I saved all of you a lot of headaches and countless hours of testing.Also HP I saved you a lot of money, as I am sure most people will be frustrated with this major flaw and return their computers to you without even wasting their time.Word of advise to HP, just give a simple slider for the people that buy your otherwise beautiful new Omen series, that would enable or disable the XMP profile, it will be just enough, we can all avoid future problems this way.And final words for people that consider configuring and buying their own Omen 30L - make sure to select the type and amount of memory that you need, yes it would be a little bit more expensive, but this way you can avoid all of the above, don't make the same mistake as me or all the other customers that decided to save some money!

26.12.2020

I myself customer of amazon sinc 2016 buying products. This is the first time i got this product in very xyz condition. Seller who sent me is very xyz.BUTUpdate 30-12-2020: Amazon took the step and refunded the 7450 back for a old RAM sent by seller.RAM speed is upto mark. Say 3200MHZ on XMP profile. Further I want to recommend seller THE YOGI for computer memories. This store has been very helpful to me during this crisis.

24.9.2019

I like this RAM. Good price for CL15. 3000MHz is plenty for Intel CPUs, not sure about Ryzen though. More attractive alternative to Corsair Vengeance RGB at a similar price. Didn't see any reviews when I purchased, but I know HyperX makes good memory (was upgrading from 16GB of Savage DDR4-2400). Enable XMP to ensure it runs at speed. It must be brand new, because it's not too popular yet.

16.4.2020

This is actually a 2400Mhz DIMM but with XMP 1: 2933Mhz and XMP 2 : 3466MHz.In most uses it works as intended but in some applications the xmp makes the application very unstable and just blue screens your computer to death every 2 minutes which even with my NVME ssd that boots my computer in 10 seconds is still very annoying.

22.5.2020

I'm in love with the RGB on these ram. It is bright and the transition between colours are very smooth and can be hypnotic! If you are installing them in your new PC make sure you check the speed in your bios because mine didn't run at 3200mhz at default so I had to manually increase the speed.

16.11.2020

The HyperX Fury RGB 128GB 3200MHz DDR4 kit is a fine way to max out an AMD x570 build. Being made by Kingston, chances are you aren't going to have to RMA this memory. ARGB effects are neat, but the main reason for buying this 128GB kit is Kingston quality, for a lot of RAM, at a good price.

2.12.2020

I know RGB add-ons for a pc is more of a statement but these are affordable, great quality and look stunning.Will I buy agin? Yes, will I get moaned at for spending more money on my pc? Yes.In short nice fast ram at a good price.

22.9.2020

The XMP profiles on these work perfectly straight out of the box with no messing on my Ryzen system. These were also only £5 more than the non-rgb at the time of purchase so well worth it for a bit of extra bling in the case.

13.10.2020

I wanted to install some more RAM in my prebuilt gaming desktop. Gladly this is what it used, and it was cheap at the time I purchased it! ($37.99)Easy to install in the DIMM slot, no issues whatsoever!

9.7.2020

Excellent quality easy to install with no issues and easily overclocked using the AMD Master Utility app where u can changed many settings related to memory speed and voltage and others.So far so good ?

27.5.2020

Came today installed but didn't work, however, after taking it out I saw a bit of dust that had made its way into the ram slot and after removing it works a charm and love the RGB amazing and great value

29.10.2020

After my first package was "delivered" but wasn't. I had to contact Amazon and they quickly shipped another order. The install is as expected, the aura led is awesome. Works as designed