logo

Info


Reviewbucket.co.uk scanned the internet for Extech DV23 reviews.
You can find all Extech DV23 reviews and ratings on this page.

Read the reviews.

Analysis


For Extech DV23, 10 customer reviews collected from 1 e-commerce sites, and the average score is 3.7.

Detailed seller stats;
Amazon has 10 customer reviews and the average score is 3.7. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

16.12.2016

The Extech DV23 Non-Contact Voltage detector is a new device for me. I have done a lot of electrical work in both new construction and rewiring of my house. I have always used a traditional tester, two wire ends into the outlet or one side of the tester on one wire and one on the other. With the Extech, it is possible to put the tester into one side of the outlet (one side of the two openings that you put a plug into) and determine which side is the hot wire and which is not. This can be particularly helpful when trying to rewire an area of the house which has older wiring which did not use black, red and white wiring.In older houses sometimes the wiring is all black or all has the same color wire whether hot or not.It is also a quick way to determine if a light or appliance is getting power. The appliance might not be working and getting electrical power might not be the problem. The tester can be put in contact with a cord and determine which wire in the cord is the hot wire without going to the bare end of the wire.I found it interesting that when I touched the palm of my hand with the tester it registered current. It only gave one light blink and beep. When testing a hot wire it continues to reacts the whole time it is near the wire. It apparently is getting a electrical charge from, likely static electricity.Because this is a new product for me and I'm dealing with something which can hurt me, I will continue to use both testers as I become more confident with the Extech. I will use it at times to determine some of the things I indicated above which a traditional tester does not do.One thing my others tester will do is let me know if the voltage is 110 or 220. This unit just tells me there is voltage present.
Read more..

13.12.2016

Part of the trick to these types of testers, and being safe with them, is understanding how they work and how to use them. It also can give "false" readings if it's picking up a nearby wire, or even if there's some static electricity. Although it's listed as AC only, it will go off via static electricity from rubbing on your clothes, and it also went signaled when I brought it near a wire fed from a AD/DC wall wart. I think this is good from a "better safe than sorry" aspect. But, there's also situations where it won't go off but electricity is live.For instance, you can stick this into a wall socket, but it you put it in the neutral leg, it won't light up. You need to make sure you're putting it into the hot leg.It seems common sense, but I'm sure not everyone knows the difference. Simply put, put it into both slots of both outlets to be safe, since even each outlet on the same box could be wired directly (like having one plug on a wall switch and the other one always on).As for the tester itself, it's built well for the price. The plastic is solid and it comes with two batteries. The cap simply twists a quarter turn to release it and put the batteries in. There's no on/off switch. It does not come with a case, but the orange cap serves as a pocket clip.
Read more..

8.12.2016

If you run (and you should run this along a wire, not just hold it up to it, as the wires can be twisted inside of a power cord) this along a live wire (or within a couple mm), or insert the end into the LIVE portion of a socket it both gives an audible continuous beep and lights up red. Works ONLY on AC current (like in your house) not on DC (battery run).This is very useful for when working with wiring as you can quickly determine what is live. Be aware when testing sockets however, to insert the end in EACH portion of the outlet. I have encountered outlets which were wired backwards so that if I had only tested the ground I would have been unaware that the outlet was live.This is so sensitive that it picks up static electricity as well.I ran a plastic grocery bag over the tip and it lit up.It says it can only be used below 7000 feet in altitude, not sure why, that makes no sense. Electricity does not behave differently at altitude. I live at 7200ft and it works fine.Well worth the about 20 bucks when attempting to diagnose problems involving wiring.
Read more..

25.12.2016

A little more substantial in your hand than other detectors of the same type, the Extech is a super -sensitive voltage detector. So sensitive is it to induction voltage that sweeping your fingers across the tip during high static periods can cause the detector to chirp. Does this mean it gives a false-positive (or negative)? Not necessarily but it is something to be aware of when you put it to use. Follow the instructors to ‘calibrate’ your usage by touching a known-hot circuit before testing your target circuit.This tool will last a long time in your tool box as heavily built as it is. The only concern I have is that there is no on/off switch to isolate the AAA batteries.Is it drawing a trickle of current during down time as it waits to detect a voltage? The manual doesn’t say so only long term use is going to answer this question.
Read more..

15.12.2016

This voltage detector is sensitive, but still useful.. Another reviewer reported theirs goes off when they touch the end of the detector, but mine does not. In my testing around the house, I mostly had to get the detector pretty close for it trigger. The only thing that seemed to set off the detector from a distance is one of our hanging ceiling lamps. The detector did not go off for any 5V USB cables, but it was triggered by my Macbook Pro laptop and the Magsafe charger, which should be outputting far less than 50V.The orange cap at the end twists off to reveal the battery compartment. The cap feels like it can be knocked loose pretty easy.This is a nice little tool to have around the house for electrical work,but keep in mind that it does seem to be set off by DC and voltages below 50V.
Read more..

18.1.2017

I am remodeling and thought I could use this Extech DV23 voltage detector. This device works very well, indicating voltage without needing to actually touch a meter to a wire by emitting a buzzing sound. However, it also buzzed in short sounds when I was just sitting at my kitchen table. I do not know what it was detecting while I was just sitting at my kitchen table. I plan to use it to locate a wire behind the drywall that became lost during my last remodel a long time ago.

9.12.2016

It works. Hold it close to a live wire and it lights up and beeps.It is very sensitive and seems to detect a static chargein the package it came with... very strange but I supposethis is a good reason to remove the batteries whenit isn't being used. The package has a battery storagearea and the unit comes with batteries so in this caseholding onto the plastic clamshell package might bea good idea.

22.12.2016

Extech's DV23 Non-Contact Voltage Detector is easy to use and is something you should have in your home when doing any electrical work. It's important to note that it can detect nearby voltage, so just use caution and be sure to check carefully. It lights up and has an audible tone. Easy to see and hear. It does appear to be fairly sensitive, which is great, because you can never be too safe.

List All Products

Terms and ConditionsPrivacy Policy