logo

Info


Reviewbucket.co.uk scanned the internet for Belkin ScreenForce InvisiGlass Ultra reviews.
You can find all Belkin ScreenForce InvisiGlass Ultra reviews and ratings on this page.

Read the reviews.

Analysis


For Belkin ScreenForce InvisiGlass Ultra, 209 customer reviews collected from 2 e-commerce sites, and the average score is 3.7.

Detailed seller stats;
Amazon has 205 customer reviews and the average score is 3.7. Go to this seller.
Ebay has 4 customer reviews and the average score is 5. Go to this seller.

Detail


Click to list all products in this category.

Similar Items

16.10.2018

Reviews for this so far have been mixed especially on the Apple accessory website, the following is based on my experiences.+ Intial impressions were good, packaged very well in typical Belkin fashion (this brand has been my go to for cables/connectors/portable speakers for years and they’ve never let me down. Their internet routers were a different story but I digress.+ Included in the pack is everything you need for a smooth, easy application including what Belkin call an easy fit tray. This is where the top of the screen protector is stuck to the tray allowing it to be set down onto the phone in a precise fashion without you wondering which side to line up first and trying to keep it straightas the adhesive takes hold.+ Speaking of adhesive this protector claims to come with a special liquid adhesive that allows for a bubble free fit. I’m happy to report it works and in fact on application you can see it slowly spread and take hold across the device.+ Application was straight forward - after cleaning the phone with the included micro fibre (which by the way is dry not wet so you may want to spray some screen cleaner first to remove any stubborn grease or fingerprints) A wipe down with isopropyl alcohol may seem excessive at this point but will help in removing any dirt 100%. There are then essentially 2 tabs, you keep hold of number 2 and peel number 1 off which exposes the sticky side ready to go down to meet the screen. I just let this happen naturally making sure the cutout for the home position was positioned correctly. Give it a few seconds for the adhesive to take hold and then you can set to work on any bubbles that have appeared.+ Luckily there were only a few bubbles and most of these appeared to be only in the film number 2 which gets completely removed anyway. Once you’re happy the protector is as tidy as possible go ahead and strip the second film off to reveal the protector.+ In use it feels very nice and does little to change the feel of the initial screen. No issues with visibility either, some cheaper protectors tend to slightly blur or yellow the display.There is however an annoying rainbow effect down either side of the screen but I’m willing to forgive this in the favour of scratch resistance and good visibility. The only factor I can’t recomend the belkin on is price - £15 would be much better value for money. In terms of easy figment and high quality I haven’t seen better.
Read more..

24.11.2019

I've used a few of these Belkin screen protectors over the years for various iPhones and always found them easy to apply and never had any issues with them. This was no exception.In the box you'll find the screen protector itself, attached to a plastic tray which is used to ensure perfect alignment. You also get a cloth for cleaning the display and a dust removal sticker.The first step is to use the cleaning cloth to clean the screen ensuring that you remove any smudges and fingerprints, along with any dust. After that, you can use the dust removal sticker to get rid of any further dust particles that may have settled on your screen.Keep this handy though as you may need it again once you have the phone in the alignment tray before you apply the screen protector.Once the phone is clean you place it in the alignment tray and the idea is that you then remove the backing to the screen protector and fold it over onto the phone. The one slight issue is that the backing to the screen protector is quite thick and stiff, so much so that you feel as if you're going to break the screen protector removing it. With a little bit of care and patience this can be removed quite easily, takes a bit to get it to budge but once the first bit is off it's easy to peel. I would then recommend using the dust removal sticker to get rid of any last second dust particles, otherwise you may end up with air bubbles once the screen protector is applied.It's then just a simple case of folding the screen protector over the phone and pressing into place to make sure it adheres to the screen. It should be perfectly aligned, but just ensure that it is as you lower it onto the phone. I ended up with a couple of bubbles under the screen protector but a bit of vigorous running with the cleaning cloth pushed them out and it was perfect after that.I didn't encounter any issues with the fit, which is perfect, it covers the screen from edge to edge with a small cutout at the top for the Face ID setup. You'd hardly tell there was a screen protector on the screen and going from experience this will probably last the life of the phone.It is a tad pricey, but I've always found these to be an excellent fit, they stay on your phone and they don't scratch during the period of use.
Read more..

20.1.2018

Just fitted the Belkin ScreenForce TemperedCurve glass screen protector on an iPhone 7.While Belkin claim it is easy to fit, screen protectors never are, there is always the risk of bubbles and dust getting underneath. Unless you live in a hermetically sealed environment you will need to find a dust free and clean area to apply this.The application process was fine except for one tiny corner which seems to refuse staying stuck down and of course a tiny bit of barely visible dust that you have to look really hard to see. It sits well on the curved screen. except for one corner.I have reservations on the cost of this product. I recently bought a box of five very good plastic film protectors from a leading brand that I have been using for years,for half the price. While this tempered glass protector has the edge on how tactile it feels, the plastic screen protectors are just too close in comparison and the fit is just as good.Screen protectors will get scratched no matter what they are made of and when this one gets damaged it will cost a lot to replace. Tempered glass is also more brittle and from experience can crack around the edge, the plastic film offers the same protection and isn’t liable to splinter. I was a fan of tempered glass for a time but the replacement costs were a little too high.However, from a tactile point of view you will be hard pressed to know there is a screen protector on your phone except for a slight ridge, it also has great clarity. If you are happy to pay then this could be for you, but for half the price you can get five quality plastic film protectors, with the same clarity, ease of application and good protection and have four spare protector films for future use.It does come with a warranty though they are generally limited and won't cover being dropped or chipped. You might also want to check it is compatible with the case you might be using.It is a good product but I struggle to justify the cost.
Read more..

26.5.2020

I bought my phone direct from the Apple store and got this put on straight away as this is the one the Genius guy recommended. Since then I have dropped my phone TWICE face down on the pavement. Here is what happened:1/ Dropped out of my hand at the height of about 3 feet. Landed face down on a small sharp pebble. Screen protector cracked in a small circle but phone screen okay. Great!2/ Dropped out of my hand again, at the height of also about 3 feet. Again landed face down on the pavement with builder's grit on it. Again, small circle cracks, phone screen where the screen was on was FINE. Not fine was the tiny edge where the screen protector DOES NOT meet the phone case. It's a 3mm gap only,but it's unprotected and now has a deep scratch in it.Conclusion - BUY THE CURVED end-to-end protector! I wish I had just paid the few extra pounds, but I only discovered the damage AFTER I removed the entire screen and was putting on the new one. Which brings me to the fiddly bit...and a HUGE WARNING...I watched the video 2x to make sure I was putting the screen protector on correctly, and still managed to mess up! Be careful when you are taking the wrapper off the installation tray, you don't get rid of the actual screen protector itself. Yes, like a complete idiot, I accidentally removed the screen protector from the installation tray and tried to install the film that is meant to protect the screen protector! When I realised my mistake, I had to put the screen protector on "freehand". It's ever so slightly misaligned, but livable!Overall - it passes the "face down" smash test, BUT only if you don't get dinged in the 3mm free space. Upgrade to their curved screen for full protection!
Read more..

3.7.2019

I’m not normally a fan of these viewable area only screen protectors. I prefer the curved ones but it can sometimes be hard to find a curved one that actually matches the curve of the phone. And if only they would make the curved ones without the black border. But that’s another thing all together.So this protector is actually quite good, it was easy to fit with the alignment case. It the hinges type where the screen protector lifts up with a pre attached sticker, you pop the phone in, removed the protective layer then lower it onto the screen. I was sceptical but actually it went on perfectly covering the viewable area.The protector itself feels great, it’s well made and as fingerprint resistant as the phone’s own screen.It’s not invisible as the name would suggest though. As you can see from the pics, you can see the edges against a black or dark screen background and at angles there is a tiny bit of rainbow effect. From a swiping point of view you can feel the edges too but they are well cut and not overly offensive to the touch like with some of the cheaper protectors out there. But these negatives aside, if it protects your screen then this isn’t the end of the world at all as that’s what you put it on for.Obviously it’s case friendly as it only covers viewable screen display and not the curved edges.It’s certainly not one of the cheaper protectors available but I’d say it does feel well made. Even the Belkin packaging was well made and protective of the protector so at least Belkin take their product seriously (unlike some cheaper brands).Based on my experience so far I’d recommend this product.
Read more..

20.7.2020

easy to apply, for reasons that mystify me, was the easiest install of a screen protect I have ever experienced. Simple instructions and it just worked. There was one bubble that didn't go away, so I carefully peeled back the cover like the instructions said and then pushed it down again, Inside the box was a plastic jig for aligning the screen protector, which looked a little like a bumper type case Just wipe the screen clean with the wet wipe provided. Whipr it dry with the cloth provided. Dab the sticky plastic sheet all over the screen to pick up any tiny dust partials.Put the screen protector alignment frame on the iPhone. Peal the film off the protector and push the protector up to the side of the frame then let go slowly.The instructions are straight forward and the product looks like it's of good quality. It does seem people are getting two types of screens, one (which I got) covers the camera and leaves a gap for the speaker and the other just covers the lit area's of the phone only leaving the camera free. My only issue is that the screen doesn't go to the every edge which I kind of get as the phone starts to bend around. the fitting device makes the screen protector sit slightly off centre. Easy to adjust but a bit annoying! Other small point is that even though it has done the job I’m pretty certain it breaks quite easily! I’ve dropped my phone many times with no protector and the case stops any screen damage. screen protector comes with a cloth, dust removing sticker and guide stickers, making it as easy as possible to install. Also no issues with trapped air bubbles.
Read more..

28.2.2020

Belkin Screen Force InvisiGlass Ultra SCREEN PROTECTOR for iPhone XR / iPhone 11• This iPhone XR / iPhone 11 Screen Protector is very well packaged so that it arrives in pristine condition. Printed on the back of the box, are the aims of the product and details of the Warranty.• Open up the box, and on the inside flap are step-by-step instructions on how to fit the Screen Protector.• Together with the Screen Protector, a multi-lingual leaflet contains all the details of the Warranty. In the Americas and Europe that Warranty is classified as ‘Lifetime’. It is further clarified that the expected ‘Lifetime’ is 5 years.For the rest of the World that Warranty is 2 years.• Also contained in the box are a Black Screen Cleaning Cloth and a Dust Removal Sticker.• This INVISIGLASS ULTRA Screen Protector is CLEAR glass.• The screen is much the same as ones used in the past, but the thing that’s sets it apart, is the applicator tray that’s comes with it. It is so easy to use and centres the glass perfectly.Obviously at this point in time, I am not able to comment on the longevity of the Screen Protector as it is only newly fitted.At time of writing this Review, the RRP is £24.99, which is a bit expensive. Only time will tell if the price is worth it for this Screen Cover, which aims to provide essential protection for your precious, and expensive Smartphone.I have deducted 1 star due to the price.
Read more..

8.2.2020

I've used a lot of screen protectors in my time and this is by far the best. Granted it's a little more expensive than the ones i've used before, but it's 100% worth it. This review is in relation to the iPhone XR: firstly, the installation is ingeniously easy. It comes (as they often do) with a small cloth and sticker to remove fingerprints and dust from the phone screen, but what set this apart is that you keep the screen protector in the plastic moulded case - it's attached with a couple of bits of stickers. After removing one of the front stickers from the protector, you lift it up and place your phone face in the mould, then the protector simply drops onto it in precisely the right place.No worry about it going on wonky, or accidentally covering any of your front-facing camera lens. Then use the cloth to ease out any air bubbles and boom - done. It took me barely a minute to apply and the result is top notch. Not a bubble in sight and it fits like an absolute dream - perfectly matching the screen. Touch responsive is as good as it was without a protector and there is no detrimental effect on screen clarity. It feels good to the touch when using the phone and it really does seem to offer a great level of protection. Would definitely get this again.
Read more..

29.6.2020

This is a reinforced glass screen protector for iPhone 11/11 XR. I needed to replace my previous glass protector as I cracked it not long after getting the phone (oops). I’ve used Belkin protectors before and generally had a good experience. I always use glass protectors as they absorb the force of any knocks and crack instead of the screen. Plus, they are much easier and smoother to apply. This one is no exception, and includes a tray for the phone to ensure even easier application - line up the tab and let the protector drop onto the screen, it’s as easy as that. No bubbles or wrinkles. Just ensure you clean the screen thoroughly beforehand with the cloth and sticker (to remove specks of dust)supplied in the box, as a single bit of dust with cause the protector not to lie flat on the screen. I feel like this particular protector maybe isn’t quite as sensitive to touch as others I’ve had, but it’s barely noticeable. Thankfully I haven’t dropped my phone since applying it (yet...), so I can’t say how protective it is from falls, but can’t see why it wouldn’t work as promised. The only thing I would say is that there is a lot of single-use plastic involved in the packaging and application. Perhaps the tray could have been cardboard?
Read more..

6.7.2019

If you're going to spend £800+ on a mobile phone I don't think you should ever skimp out of cheap screen protectors! I've been using Belkin screen protectors for years now on all of my different iPhones, so when Amazon reached out and offered me this one to review for free I happily accepted.This screen protector was incredibly easy to apply, and full instructions on how to get the best adhesion were included in the box. The box also contained wipes and dust cloths in order to properly prepare the screen, and a template to place onto your phone to ensure the screen protector was placed as centrally as possible... something other brands just don't consider. A complete beginner could fit this protector like a pro!Price wise,whilst I did receive this product for free in exchange for a review, the £14.99 price point is incredible value for the quality of the product. I would have happily paid the full price for this product (and have been buying these at this price for years for other iPhone models), as the Belkin screen protectors are so much thinner but yet so much sturdier and drop resistant than competitors.Incredibly happy with this product, and will continue to purchase Belkin screen protectors in the future.
Read more..

29.7.2017

The first thing you notice is the price, it is an expensive screen protector. There are many reasons for this, the main ones being Corning glass, extra strength, thin, better adhesion, better scratch protection and a well known brand. You can get cheaper, but are they better?The box it comes in is fairly big for a screen protector. The front cover opens up like a book with a magnetic closure. Inside is the screen protector, a cleaning strip for the screen and a holder to place the phone so the cover is perfectly aligned.The cover goes on easily following the instructions provided. You will need to take the phone out of any case before applying the protector. This is the easiest protector I have applied,the holder and the way the protector is hinged at the top of the holder make a perfect alignment first time.It went on easy, no bubbles or marks. The touch screen has not been compromised in any way, and I feel more confident with this protector than the cheaper ones.I do feel that it is a little more expensive than it should be, even with all the reasons I stated first. But in the end, you do get a quality protector from an established brand name.
Read more..

9.11.2019

This is a screen protector for the iPhone 11 Pro Max which is also compatible with the iPhone X Max. In addition to the screen itself and mounting instructions you get a dust cloth, double-sided tape to,help remove dust on the phone screen, and a plastic mounting guide.The mounting guide is probably the most sophisticated I’ve seen with a screen protector. The phone is held in place is a mounting frame and the screen protector, pre-mounted on the frame, helps to position the protector adequately. It works pretty well.Despite the screen mounting device it’s still easy to slightly mis-align the screen which as it is an edge-to-edge design can cause problems. I also managed to get two air bubbles under the screen.Overall I guess the installation process was slightly easier to install. One in place the screen works as predicted.This is an expensive screen protector and whilst the mounting frame helps with positioning it is not foolproof. It would be more helpful to provide two protectors so there’s some room for error. Nonetheless is works pretty well as it is. Just about four stars.
Read more..

13.6.2019

Once your into the packaging - often a challenge and no different here, you will find a selection of things to ease the process of applying your new screen protector. This includes a “sticky” dust remover along with a polishing cloth.A novel approach - at least in my experience - is the use of a plastic tray to hold the phone in the “right” position during application.This works really well - it lines up the phone perfectly - and the final result is basically perfect positioning. The downside is if you have a case on your phone which is difficult to remove. In that case you need to struggle to remove the protector before you try applying it “the old way”.However for anyone with a phone that is either “naked” or easily removed from its case - it’s a great help. The downside is that you end up with a lot of “one time use” material to simply bin.Bottom line - easily applied and accurately - as long as your phone is not locked in a case. A little on the downside regarding levels of waste. Once applied use of the screen is basically the same as without a protector.
Read more..

13.5.2018

I have used several tempered glass screen protectors over the years and found they vary massively in price and quality. You can get multipacks of screen protectors for a fraction of the price of this one protector from Belkin. So is it worth the extra? Well, yes. It’s very well made and easy to apply. There is zero bubbling like you get with the flimsy non-tempered protectors. Simply align to your screen and smooth it down. It takes just seconds to apply and once on you really don’t notice it’s there. It doesn’t affect the sensitivity or accuracy of the screen at all and unlike some, there is no gap over the screen. You also get a small lint cloth to clean the screen of your phone before application.Other cheaper offerings have a tendency to crack under general use but I’ve had no such issues with this one. If heaven forbid you drop the phone, it will prevent the screen from cracking which is a major hassle and very expensive to repairYes it’s a lot more money but I do believe it’s worth it for the higher quality of the product
Read more..

22.3.2018

This is an expensive screen protector, however it is the best one I’ve used. It fits great and was easy to apply with the guide, it’s very high quality, it curves slightly and blends with the phone so it’s near invisible. It also has room for cases which is unusually good for this type of screen protector.The main gripe I have with it is the fact that the sensors at the top are covered with clear glass. It makes them a bit hit or miss and looks a bit out of place and I can’t think of why they wouldn’t just cut out the glass like they have for the camera and ear piece?! It also collects loads of dust which bugs the hell out of me. Belkin if you read this please just do that!!!Also there are a couple of little specs at the bottom of my screen which are clearly a fault with the adhesive but I will put that to a one off in my case.So overall very good, for me it’s worth the money as it’s the best one I’ve used as so far has held up well, just that one issue which is stopping it from being 5 stars.
Read more..

List All Products

Terms and ConditionsPrivacy Policy